[PATCH 1/4] ath11k: use hw_params to access board_size and cal_offset

[Kalle Valo]

Jouni Malinen <jouni at codeaurora.org> writes:

> From: Anilkumar Kolli <akolli at codeaurora.org>
>
> Reuse board_size from hw_params, add cal_offset to hw params.
> This patch is clean up only, there is no change in functionality.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Anilkumar Kolli <akolli at codeaurora.org>
> Signed-off-by: Jouni Malinen <jouni at codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath11k/core.c | 10 +++++-----
>  drivers/net/wireless/ath/ath11k/hw.h   |  2 +-
>  drivers/net/wireless/ath/ath11k/qmi.c  |  4 ++--
>  drivers/net/wireless/ath/ath11k/qmi.h  |  2 --
>  4 files changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
> index c97830633f1f..d2ab3b134632 100644
> --- a/drivers/net/wireless/ath/ath11k/core.c
> +++ b/drivers/net/wireless/ath/ath11k/core.c
> @@ -37,7 +37,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.fw = {
>  			.dir = "IPQ8074/hw2.0",
>  			.board_size = 256 * 1024,
> -			.cal_size = 256 * 1024,
> +			.cal_offset = 128 * 1024,
>  		},
>  		.max_radios = 3,
>  		.bdf_addr = 0x4B0C0000,
> @@ -87,7 +87,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.fw = {
>  			.dir = "IPQ6018/hw1.0",
>  			.board_size = 256 * 1024,
> -			.cal_size = 256 * 1024,
> +			.cal_offset = 128 * 1024,
>  		},
>  		.max_radios = 2,
>  		.bdf_addr = 0x4ABC0000,
> @@ -134,7 +134,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.fw = {
>  			.dir = "QCA6390/hw2.0",
>  			.board_size = 256 * 1024,
> -			.cal_size = 256 * 1024,
> +			.cal_offset = 128 * 1024,
>  		},
>  		.max_radios = 3,
>  		.bdf_addr = 0x4B0C0000,
> @@ -180,7 +180,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.fw = {
>  			.dir = "QCN9074/hw1.0",
>  			.board_size = 256 * 1024,
> -			.cal_size = 256 * 1024,
> +			.cal_offset = 128 * 1024,
>  		},
>  		.max_radios = 1,
>  		.single_pdev_only = false,
> @@ -226,7 +226,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.fw = {
>  			.dir = "WCN6855/hw2.0",
>  			.board_size = 256 * 1024,
> -			.cal_size = 256 * 1024,
> +			.cal_offset = 128 * 1024,
>  		},
>  		.max_radios = 3,
>  		.bdf_addr = 0x4B0C0000,
> diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
> index 5d150cd793b2..3a03e09563e7 100644
> --- a/drivers/net/wireless/ath/ath11k/hw.h
> +++ b/drivers/net/wireless/ath/ath11k/hw.h
> @@ -128,7 +128,7 @@ struct ath11k_hw_params {
>  	struct {
>  		const char *dir;
>  		size_t board_size;
> -		size_t cal_size;
> +		size_t cal_offset;

You don't mention anything about cal_size. I'll add this to the commit
log:

cal_size was unused, so remove that.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches