[PATCH 3/5] ath11k: Fix inaccessible debug registers

[Jouni Malinen]

From: Baochen Qiang <bqiang at codeaurora.org>

Current code clears debug registers after SOC global reset performed
in ath11k_pci_sw_reset. However at that time those registers are
not accessible due to reset, thus they are actually not cleared at all.
For WCN6855, it may cause target fail to initialize. This issue can be
fixed by moving clear action ahead.

In addition, on some specific platforms, need to add delay to wait
those registers to become accessible.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Baochen Qiang <bqiang at codeaurora.org>
Signed-off-by: Jouni Malinen <jouni at codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/pci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index 5abb38cc3b55..7b3bce0ba76e 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -430,6 +430,8 @@ static void ath11k_pci_force_wake(struct ath11k_base *ab)
 
 static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on)
 {
+	mdelay(100);
+
 	if (power_on) {
 		ath11k_pci_enable_ltssm(ab);
 		ath11k_pci_clear_all_intrs(ab);
@@ -439,9 +441,9 @@ static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on)
 	}
 
 	ath11k_mhi_clear_vector(ab);
+	ath11k_pci_clear_dbg_registers(ab);
 	ath11k_pci_soc_global_reset(ab);
 	ath11k_mhi_set_mhictrl_reset(ab);
-	ath11k_pci_clear_dbg_registers(ab);
 }
 
 int ath11k_pci_get_msi_irq(struct device *dev, unsigned int vector)
-- 
2.25.1