[PATCH] ath11k: clear the keys properly when DISABLE_KEY

[Sven Eckelmann]

From: Karthikeyan Kathirvel <kathirve at codeaurora.org>

DISABLE_KEY sets the key_len to 0, firmware will not delete the keys if
key_len is 0. Changing from security mode to open mode will cause mcast
to be still encrypted without vdev restart.

Set the proper key_len for DISABLE_KEY cmd to clear the keys in
firmware.

Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Sven Eckelmann <sven at narfation.org>
Signed-off-by: Karthikeyan Kathirvel <kathirve at codeaurora.org>
[sven at narfation.org: Drop chunks which are for NSS and other parts QCA
 didn't upstream]
Signed-off-by: Sven Eckelmann <sven at narfation.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 4 +---
 drivers/net/wireless/ath/ath11k/wmi.c | 3 ++-
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 1cc55602787b..cdee7545e876 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3316,9 +3316,7 @@ static int ath11k_install_key(struct ath11k_vif *arvif,
 		return 0;
 
 	if (cmd == DISABLE_KEY) {
-		/* TODO: Check if FW expects  value other than NONE for del */
-		/* arg.key_cipher = WMI_CIPHER_NONE; */
-		arg.key_len = 0;
+		arg.key_cipher = WMI_CIPHER_NONE;
 		arg.key_data = NULL;
 		goto install;
 	}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 5ae2ef4680d6..d97be60689be 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1689,7 +1689,8 @@ int ath11k_wmi_vdev_install_key(struct ath11k *ar,
 	tlv = (struct wmi_tlv *)(skb->data + sizeof(*cmd));
 	tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_BYTE) |
 		      FIELD_PREP(WMI_TLV_LEN, key_len_aligned);
-	memcpy(tlv->value, (u8 *)arg->key_data, key_len_aligned);
+	if (arg->key_data)
+		memcpy(tlv->value, (u8 *)arg->key_data, key_len_aligned);
 
 	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_VDEV_INSTALL_KEY_CMDID);
 	if (ret) {
-- 
2.30.2