Can not unload ath11k_pci and load it back

[Kalle Valo]

Mark Herbert <mark.herbert42 at gmail.com> writes:

> I've found similar bug files already - so not to create duplicates
> simply commented there
>
> https://bugzilla.kernel.org/show_bug.cgi?id=214541
>
> Exactly - hibernation means saving state on disk and resuming later,
> it is a very usefull feature when you are running out of battery and
> want to save your work.

Got it, thanks. So it seems we have two issues here: ath11k does not
support hibernation and ath11k module reload failing. Let's handle the
module reload failing in bug #214541, but can you file another bug about
the missing support for hibernation? Let's have one issue per bug
report, it's easier to manage bugzilla that way.

> Also one more point I've found - if MHI is configured in the kernel - 
> the card is starting up on thr first boot and works. But if i
> configure MHI as a module - it does not. MHI module do load. So do 
> ath11k and ath11k_pci.  But the last ath11k dmesg says :
>
> mhi mhi0: Wait for device to enter SBL or Mission mode
>
> Exactly as if I  do rmmod/modprobe sequence.
>
> I use latest BIOS from Dell (in fact upgrading 3.0.4 to 3.1.0 did not
> cange anythng) ,  and have tried multiple kernels. Stable 5.14 series
> and ath11k git tree (next and master-pending). Nothing helps. 
> Sometimes it woks out - I had couple of times successfully
> rmmod/modprobe ath11k_pci but it s a kind of random and very rare
> event ( I had it 2 times only).
>
> So for me it looks like an issue between MHI and ath11k , but
> ubfortunately my knowledge is not enough to propose any solution here.

On my NUC x86 test box I reload ath11k modules several times a day while
I test ath11k but I always reload the mhi modules at the same time,
maybe that makes the difference? Or XPS 13 9310 works differently from
NUC, that's also possible.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches