ath11k: QCN9074: Incompatible board-2.bin for 6GHz

[Mark Herbert]

Will there be a new FW for QCA6390?  It seems to be the most outdated in 
Kalle's repo :(

On 26.11.2021 17:54, John Crispin wrote:
>
>
> On 26.11.21 11:52, Sven Eckelmann wrote:
>> I found out that this is actually caused by the BDF. If I've 
>> extracted the
>> board.bin from the TIP board-2.bin [3] (which seems to come from the QCA
>> ATH.11.4 CS release). With this version, it seems to work fine. I 
>> haven't yet
>> found out what the relevant change is - but if someone has hints then 
>> this
>> would could be interesting for other devices which should be added to 
>> things
>> like OpenWrt.
>
> Kalle's repo is outdated by several releases. This is the new upstream 
> repo.
>
> the error you are seeing is an ABI breakage between pre/post sfp11.4 
> fw/bdf. using a fw >= 2.5.x requires a BDF generated with / derviced 
> from >= sfp11.4
>
> the BDFs inside the TIP repo come from here
> --> https://github.com/quic/upstream-wifi-fw/
>
>     John
>