[PATH v3 1/2] dt: bindings: add new DT entry for ath11k PCI device support

[Rob Herring]

On Thu, Nov 18, 2021 at 07:44:51PM +0530, Anilkumar Kolli wrote:
> Ath11k driver supports PCI devices such as QCN9074/QCA6390.
> Ath11k firmware uses host DDR memory, DT entry is used to reserve
> these host DDR memory regions, send these memory base
> addresses using DT entries.
> 
> Signed-off-by: Anilkumar Kolli <akolli at codeaurora.org>
> ---
> V2:
>   - Use reserved-memory (Rob)
> 
>  .../bindings/net/wireless/qcom,ath11k.yaml         | 48 ++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> index 85c2f699d602..5a8994f6cb10 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
> @@ -150,6 +150,12 @@ properties:
>        string to uniquely identify variant of the calibration data in the
>        board-2.bin for designs with colliding bus and device specific ids
>  
> +  memory-region:
> +    maxItems: 1
> +    description:
> +      phandle to a node describing reserved memory (System RAM memory)
> +      used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
> +
>  required:
>    - compatible
>    - reg
> @@ -279,3 +285,45 @@ examples:
>                            "tcl2host-status-ring";
>          qcom,rproc = <&q6v5_wcss>;
>      };
> +

This looks like a separate example. Please split to its own entry.

> +    memory {
> +        device_type = "memory";
> +        reg = <0x0 0x40000000 0x0 0x20000000>;
> +    };

Outside the scope of what's needed in the example.

> +
> +    reserved-memory {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +
> +        qcn9074_pcie0: qcn9074_pcie0 at 51100000 {
> +            no-map;
> +            reg = <0x0 0x51100000 0x0 0x03500000>;
> +        };
> +
> +        qcn9074_pcie1: qcn9074_pcie1 at 54600000 {
> +            no-map;
> +            reg = <0x0 0x54600000 0x0 0x03500000>;
> +        };
> +    };

As is this really.

> +
> +    pcie0_rp: pcie0_rp {
> +        reg = <0 0 0 0 0>;

This isn't a valid PCI bus binding.

> +
> +        status = "ok";

Don't need status.

> +        ath11k_0: ath11k at 0 {

wifi at 0

> +            reg = <0 0 0 0 0 >;
> +            memory-region = <&qcn9074_pcie0>;
> +        };
> +    };
> +
> +    pcie1_rp: pcie1_rp {
> +        reg = <0 0 0 0 0>;
> +
> +        status = "ok";
> +        ath11k_1: ath11k at 1 {
> +            reg = <0 0 0 0 0 >;

unit-address and reg don't match.

Why do we need 2 nodes in the first place?

> +            memory-region = <&qcn9074_pcie1>;
> +        };
> +    };
> +
> -- 
> 2.7.4
> 
>