IPQ6018 issues
Robert Marko
robert.marko at sartura.hr
Tue May 11 09:18:04 PDT 2021
On Tue, May 11, 2021 at 6:14 PM Bhagavathi Perumal S
<bperumal at codeaurora.org> wrote:
>
> On 2021-05-07 16:08, Robert Marko wrote:
> > Hi,
> >
> > I could not previously reply to my inquiry as for whatever reason I
> > did not receive the message to my email.
> >
> > I have managed to get the ath11k mostly working on IPQ6018, the issue
> > was in the APPS PLL and the resets in the GCC driver
> > were not fully working and some were incorrect.
> >
> > So, after backporting all of the downstream 5.4 changes to clock
> > drivers ath11k mostly works, however, if cold-boot calibration is
> > enabled it will then trigger the remoteproc WDT and crash and hang the
> > board as well.
> >
> > However, I have not been able to get the radio working in 80 or 160MHz
> > mode, only 20MHz.
> >
> > Trying 80Mhz will simply fail like this log:
> > https://gist.github.com/robimarko/b0d002a4cc5390a82a22eb47aa97684d
> >
> > Hostapd 2.9 config used is:
> > root at localhost $ cat hostapd-ax.conf
> > logger_syslog=-1
> > logger_syslog_level=2
> > logger_stdout=-1
> > logger_stdout_level=2
> > ctrl_interface=/var/run/hostapd
> >
> > interface=wlan0
> > bridge=br-lan
> > driver=nl80211
> > ssid=AXTest
> > country_code=US
> > ieee80211d=1
> > ieee80211h=1
> > hw_mode=a
> > channel=36
> > wmm_enabled=1
> > ieee80211n=0
>
> Please try with enabling ieee80211n and ht_capab. Have you tried with
> default configs?
Yeah, after enabling ieee80211n and ht_capab as well as vht_capab it
will start in 80MHz as well.
I have further testing on hold as after getting SSDK and NSS-DP in
mainline it's really unstable and
remoteproc will crash after connecting a client.
With a USB to ethernet I could easily get 270Mbps on 40Mhz as that is
max that the USB adapter can do.
Regards
>
> > ieee80211ac=1
> > ieee80211ax=1
> > he_oper_chwidth=1
> > he_oper_centr_freq_seg0_idx=42
> >
> > Regards,
> > Robert
> >
> >
> > On Fri, May 7, 2021 at 7:35 AM John Crispin <john at phrozen.org> wrote:
> >>
> >> Hi Bhagavathi,
> >>
> >> please confirm whether QCA tests patches it sends upstream against the
> >> upstream kernel and not the forked v4.4 QSDK kernel.
> >>
> >> John
> >>
> >> On 07.05.21 07:02, Bhagavathi Perumal S wrote:
> >> > On 2021-05-04 22:05, Robert Marko wrote:
> >> >> Hi,
> >> >>
> >> >> I am trying to use ath11k on multiple IPQ6018 and IPQ6010 boards,
> >> >> unfortunately, they will all fail like this:
> >> >>>
> >> >>> # echo c000000.wifi > /sys/bus/platform/drivers/ath11k/bind
> >> >>> [ 12.417214] ath11k c000000.wifi: event type: 0
> >> >>> [ 12.417557] ath11k c000000.wifi: qmi ignore invalid mem req type 3
> >> >>> [ 12.420605] ath11k c000000.wifi: event type: 2
> >> >>> [ 12.427191] ath11k c000000.wifi: event type: 3
> >> >>> [ 12.431312] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4
> >> >>> board_id 0xff soc_id 0xffffffff
> >> >>> [ 12.435626] ath11k c000000.wifi: fw_version 0x240606c6
> >> >>> fw_build_timestamp 2021-02-12 03:17 fw_build_id
> >> >>> QC_IMAGE_VERSION_STRING=WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1
> >> >>> [ 12.447560] ath11k c000000.wifi: event type: 4
> >> >>> [ 12.459215] ath11k c000000.wifi: ATH11K_QMI_EVENT_FW_READY
> >> >>> [ 12.463551] ath11k c000000.wifi: ath11k_core_qmi_firmware_ready
> >> >>> [ 12.469013] ath11k c000000.wifi: ath11k_core_qmi_firmware_ready
> >> >>> start
> >> >>> [ 12.474900] ath11k c000000.wifi: ath11k_ce_init_pipes pass
> >> >>> # [ 12.491124] ath11k c000000.wifi: ath11k_crypto_mode: 0
> >> >>>
> >> >>> Format: Log Type - Time(microsec) - Message - Optional Info
> >> >>> Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
> >> >>> S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00098-IPQ60xxLZB-1
> >> >>> S - IMAGE_VARIANT_STRING=IPQ6018LA
> >> >>> S - OEM_IMAGE_VERSION_STRING=crm-ubuntu121
> >> >>> S - Boot Interface: SPI
> >> >>> S - Secure Boot: Off
> >> >>> S - Boot Config @ 0x000a602c = 0x000002e1
> >> >>> S - JTAG ID @ 0x000a607c = 0x0013a0e1
> >> >>> S - OEM ID @ 0x000a6080 = 0x00000000
> >> >>> S - Serial Number @ 0x000a4128 = 0xd92ca102
> >> >>> S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
> >> >>> S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
> >> >>> S - Feature Config Row 0 @ 0x000a4130 = 0x0000000008000001
> >> >>> S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83383000009
> >> >>> S - PBL Patch Ver: 1
> >> >>> S - I-cache: On
> >> >>> S - D-cache: On
> >> >>> B - 3413 - PBL, Start
> >> >>> B - 592 - bootable_media_detect_entry, Start
> >> >>> B - 4339 - bootable_media_detect_success, Start
> >> >>> B - 4435 - elf_loader_entry, Start
> >> >>> B - 4607 - auth_hash_seg_entry, Start
> >> >>> B - 10854 - auth_hash_seg_exit, Start
> >> >>> B - 11350 - elf_segs_hash_verify_entry, Start
> >> >>> B - 357983 - elf_segs_hash_verify_exit, Start
> >> >>> B - 362173 - auth_xbl_sec_hash_seg_entry, Start
> >> >>> B - 362318 - auth_xbl_sec_hash_seg_exit, Start
> >> >>> B - 368868 - xbl_sec_segs_hash_verify_entry, Start
> >> >>> B - 368869 - xbl_sec_segs_hash_verify_exit, Start
> >> >>> B - 369798 - PBL, End
> >> >>> B - 296002 - SBL1, Start
> >> >>> B - 435814 - GCC [RstStat:0x2, RstDbg:0x420100] WDog Stat : 0x4
> >> >>> B - 438254 - clock_init, Start
> >> >>> D - 3812 - clock_init, Delta
> >> >>> B - 447862 - boot_flash_init, Start
> >> >>> D - 8082 - boot_flash_init, Delta
> >> >>> B - 458201 - sbl1_ddr_set_default_params, Start
> >> >>> D - 274 - sbl1_ddr_set_default_params, Delta
> >> >>> B - 464820 - boot_config_data_table_init, Start
> >> >>> D - 1891 - boot_config_data_table_init, Delta - (575 Bytes)
> >> >>> B - 473970 - CDT Version:2,Platform ID:8,Major ID:3,Minor
> >> >>> ID:0,Subtype:0
> >> >>> B - 479490 - Image Load, Start
> >> >>> D - 6619 - OEM_MISC Image Loaded, Delta - (0 Bytes)
> >> >>> B - 488823 - Image Load, Start
> >> >>> D - 5063 - PMIC Image Loaded, Delta - (0 Bytes)
> >> >>> B - 496692 - sbl1_ddr_set_params, Start
> >> >>> B - 501694 - CPR configuration: 0x366
> >> >>> B - 504897 - Pre_DDR_clock_init, Start
> >> >>> D - 183 - Pre_DDR_clock_init, Delta
> >> >>> D - 0 - sbl1_ddr_set_params, Delta
> >> >>
> >> >>
> >> >> I added most of the prints to figure out where it dies.
> >> >> If cold-boot calibration is enabled then it will die on the
> >> >> ath11k_qmi_process_coldboot_calibration(), to be exact on the
> >> >>>
> >> >>> ret = ath11k_qmi_wlanfw_mode_send(ab, ATH11K_FIRMWARE_MODE_COLD_BOOT);
> >> >>
> >> >>
> >> >> But, if cold-boot calibration is disabled then ti will fail in
> >> >> ath11k_core_qmi_firmware_ready at or after ath11k_crypto_mode switch.
> >> >>
> >> >> A big issue is that it will crash the board and it will get stuck in
> >> >> SBL, only removing the power will help.
> >> >>
> >> >> The hardware I tried on is:
> >> >> * Wallys CP01-C1
> >> >> * Wallys CP03-C1
> >> >> * Alfa AP1800C-AX PRO
> >> >>
> >> >> I also tried fw versions from 2.1.0.1 to 2.5.0.1-R2
> >> >>
> >> >> Does anybody have an idea how to solve this?
> >> >>
> >> >> --
> >> >> Robert Marko
> >> >> Staff Embedded Linux Engineer
> >> >> Sartura Ltd.
> >> >> Lendavska ulica 16a
> >> >> 10000 Zagreb, Croatia
> >> >> Email: robert.marko at sartura.hr
> >> >> Web: www.sartura.hr
> >> >
> >> > Hi, Please share full boot up log(enable below logs and include them
> >> > as well), what is the image version you used and please share kernel
> >> > version as well? and share us the codebase details as well?
> >> >
> >> > ATH11K_DBG_QMI = 0x00000040,
> >> > ATH11K_DBG_BOOT = 0x00000020
> >> >
> >> > eg:
> >> > echo 0x60 >/sys/module/ath11k/parameters/debug_mask
> >> >
> >> > or modify below file and get during boot
> >> >
> >> > $cat /etc/modules.d/ath11k
> >> > ath11k debug_mask=0x60
> >> > ath11k_ahb
> >> >
> >> >
> >> >
--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko at sartura.hr
Web: www.sartura.hr
More information about the ath11k
mailing list