[PATCH v4 0/3] Add support to configure beacon tx mode

[Jeff Johnson]

On 2021-06-08 08:07, Maharaja Kennadyrajan wrote:
> Add support to configure the beacon tx mode as STAGGERED
> or BURST mode via hostapd configuration during the AP
> bring-up or via wpa_suppplicant configuration during MESH
> bring-up.
> 
> Beacons can be sent out in burst(continuously in a single shot
> one after another) or staggered (equally spread out over beacon
> interval) mode.
> 
> V4: Rebased on latest ath.git TOT.
> 
> V3: Addressed Johnson's comment on v2 patch.
> 
> V2: Addressed Johannes's comment on v1 patch.
> 
> Maharaja Kennadyrajan (3):
>   nl80211: Add support for beacon tx mode
>   mac80211: Add support for beacon tx mode
>   ath11k: Add support for beacon tx mode
> 
>  drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
>  include/net/cfg80211.h                |  4 ++++
>  include/net/mac80211.h                |  2 ++
>  include/uapi/linux/nl80211.h          | 16 ++++++++++++++++
>  net/mac80211/cfg.c                    |  2 ++
>  net/wireless/nl80211.c                |  9 +++++++++
>  6 files changed, 40 insertions(+), 3 deletions(-)

For entire set:
Reviewed-by: Jeff Johnson <jjohnson at codeaurora.org>