[PATCH 5.12] ath11k: fix AP mode for QCA6390

[Kalle Valo]

Kalle Valo <kvalo at codeaurora.org> wrote:

> Commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") completely
> broke AP mode on QCA6390:
> 
> kernel: [  151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22
> wpa_supplicant[2307]: Failed to set beacon parameters
> wpa_supplicant[2307]: Interface initialization failed
> wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED
> wpa_supplicant[2307]: wlan0: AP-DISABLED
> wpa_supplicant[2307]: wlan0: Unable to setup interface.
> wpa_supplicant[2307]: Failed to initialize AP interface
> 
> This was because commit c134d1f8c436 ("ath11k: Handle errors if peer creation
> fails") added error handling for ath11k_peer_create(), which had been failing
> all along but was unnoticed due to the missing error handling. The actual bug
> was introduced already in commit aa44b2f3ecd4 ("ath11k: start vdev if a bss peer is
> already created").
> 
> ath11k_peer_create() was failing because for AP mode the peer is created
> already earlier op_add_interface() and we should skip creation here, but the
> check for modes was wrong.  Fixing that makes AP mode work again.
> 
> This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled.
> 
> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
> 
> Fixes: c134d1f8c436 ("ath11k: Handle errors if peer creation fails")
> Signed-off-by: Kalle Valo <kvalo at codeaurora.org>

Patch applied to wireless-drivers.git, thanks.

77d7e87128d4 ath11k: fix AP mode for QCA6390

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/1614006849-25764-1-git-send-email-kvalo@codeaurora.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches