[PATCHv2] ath11k: Enable radar detection for 160MHz secondary segment

[Lavanya Suresh]

WMI_CHAN_INFO_DFS_FREQ2 needs to be set in wmi vdev start command chan
info parameter, to enable radar detection for secondary segment in 160MHz.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1

Signed-off-by: Lavanya Suresh <lavaks at codeaurora.org>
---
v2:
* Rebased on latest ath.git

---
 drivers/net/wireless/ath/ath11k/mac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index b391169..a650d95 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5096,13 +5096,15 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
 		arg.channel.chan_radar =
 			!!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
 
+		arg.channel.freq2_radar =
+			!!(chandef->chan->flags & IEEE80211_CHAN_RADAR);
+
 		arg.channel.passive = arg.channel.chan_radar;
 
 		spin_lock_bh(&ab->base_lock);
 		arg.regdomain = ar->ab->dfs_region;
 		spin_unlock_bh(&ab->base_lock);
 
-		/* TODO: Notify if secondary 80Mhz also needs radar detection */
 		if (he_support) {
 			ret = ath11k_set_he_mu_sounding_mode(ar, arvif);
 			if (ret) {
-- 
2.7.4