[PATCH 06/11] ath11k: add static window support for register access
Anilkumar Kolli
akolli at codeaurora.org
Wed Feb 10 03:42:05 EST 2021
From: Karthikeyan Periyasamy <periyasa at codeaurora.org>
Three window slots can be configure. First window slot
dedicate for dynamic selection and remaining two slots
dedicate for static selection. To optimise the window
selection, frequent registers (UMAC, CE) are configure
in static window slot. so that we minimise the window
selection. Other registers are configure in dynamic window
slot. Get the window start address from the respective
offset and access the read/write register.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <periyasa at codeaurora.org>
---
drivers/net/wireless/ath/ath11k/core.h | 1 +
drivers/net/wireless/ath/ath11k/hal.h | 4 ++
drivers/net/wireless/ath/ath11k/pci.c | 72 +++++++++++++++++++++++++++++-----
3 files changed, 68 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 9a8fb23577b0..912294f7657c 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -608,6 +608,7 @@ struct ath11k_bus_params {
bool m3_fw_support;
bool fixed_bdf_addr;
bool fixed_mem_region;
+ bool static_window_map;
};
/* IPQ8074 HW channel counters frequency value in hertz */
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index 1f1b29cd0aa3..3f5687ebe1fc 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -39,6 +39,7 @@ struct ath11k_base;
#define HAL_SHADOW_REG(x) (HAL_SHADOW_BASE_ADDR + (4 * (x)))
/* WCSS Relative address */
+#define HAL_SEQ_WCSS_UMAC_OFFSET 0x00a00000
#define HAL_SEQ_WCSS_UMAC_REO_REG 0x00a38000
#define HAL_SEQ_WCSS_UMAC_TCL_REG 0x00a44000
#define HAL_SEQ_WCSS_UMAC_CE0_SRC_REG 0x00a00000
@@ -47,6 +48,9 @@ struct ath11k_base;
#define HAL_SEQ_WCSS_UMAC_CE1_DST_REG 0x00a03000
#define HAL_SEQ_WCSS_UMAC_WBM_REG 0x00a34000
+#define HAL_CE_WFSS_CE_REG_BASE 0x01b80000
+#define HAL_WLAON_REG_BASE 0x01f80000
+
/* SW2TCL(x) R0 ring configuration address */
#define HAL_TCL1_RING_CMN_CTRL_REG 0x00000014
#define HAL_TCL1_RING_DSCP_TID_MAP 0x0000002c
diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index 5edcb1ef9523..f112ebd9d98b 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -133,9 +133,38 @@ static inline void ath11k_pci_select_window(struct ath11k_pci *ab_pci, u32 offse
}
}
+static inline void ath11k_pci_select_static_window(struct ath11k_pci *ab_pci)
+{
+ u32 umac_window = FIELD_GET(WINDOW_VALUE_MASK, HAL_SEQ_WCSS_UMAC_OFFSET);
+ u32 ce_window = FIELD_GET(WINDOW_VALUE_MASK, HAL_CE_WFSS_CE_REG_BASE);
+ u32 window;
+
+ window = (umac_window << 12) | (ce_window << 6);
+
+ iowrite32(WINDOW_ENABLE_BIT | window, ab_pci->ab->mem + WINDOW_REG_ADDRESS);
+}
+
+static inline u32 ath11k_pci_get_window_start(struct ath11k_base *ab,
+ u32 offset)
+{
+ u32 window_start;
+
+ /* If offset lies within DP register range, use 3rd window */
+ if ((offset ^ HAL_SEQ_WCSS_UMAC_OFFSET) < WINDOW_RANGE_MASK)
+ window_start = 3 * WINDOW_START;
+ /* If offset lies within CE register range, use 2nd window */
+ else if ((offset ^ HAL_CE_WFSS_CE_REG_BASE) < WINDOW_RANGE_MASK)
+ window_start = 2 * WINDOW_START;
+ else
+ window_start = WINDOW_START;
+
+ return window_start;
+}
+
void ath11k_pci_write32(struct ath11k_base *ab, u32 offset, u32 value)
{
struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
+ u32 window_start;
/* for offset beyond BAR + 4K - 32, may
* need to wakeup MHI to access.
@@ -147,10 +176,21 @@ void ath11k_pci_write32(struct ath11k_base *ab, u32 offset, u32 value)
if (offset < WINDOW_START) {
iowrite32(value, ab->mem + offset);
} else {
- spin_lock_bh(&ab_pci->window_lock);
- ath11k_pci_select_window(ab_pci, offset);
- iowrite32(value, ab->mem + WINDOW_START + (offset & WINDOW_RANGE_MASK));
- spin_unlock_bh(&ab_pci->window_lock);
+ if (ab->bus_params.static_window_map)
+ window_start = ath11k_pci_get_window_start(ab, offset);
+ else
+ window_start = WINDOW_START;
+
+ if (window_start == WINDOW_START) {
+ spin_lock_bh(&ab_pci->window_lock);
+ ath11k_pci_select_window(ab_pci, offset);
+ iowrite32(value, ab->mem + window_start +
+ (offset & WINDOW_RANGE_MASK));
+ spin_unlock_bh(&ab_pci->window_lock);
+ } else {
+ iowrite32(value, ab->mem + window_start +
+ (offset & WINDOW_RANGE_MASK));
+ }
}
if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
@@ -161,7 +201,7 @@ void ath11k_pci_write32(struct ath11k_base *ab, u32 offset, u32 value)
u32 ath11k_pci_read32(struct ath11k_base *ab, u32 offset)
{
struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
- u32 val;
+ u32 val, window_start;
/* for offset beyond BAR + 4K - 32, may
* need to wakeup MHI to access.
@@ -173,10 +213,21 @@ u32 ath11k_pci_read32(struct ath11k_base *ab, u32 offset)
if (offset < WINDOW_START) {
val = ioread32(ab->mem + offset);
} else {
- spin_lock_bh(&ab_pci->window_lock);
- ath11k_pci_select_window(ab_pci, offset);
- val = ioread32(ab->mem + WINDOW_START + (offset & WINDOW_RANGE_MASK));
- spin_unlock_bh(&ab_pci->window_lock);
+ if (ab->bus_params.static_window_map)
+ window_start = ath11k_pci_get_window_start(ab, offset);
+ else
+ window_start = WINDOW_START;
+
+ if (window_start == WINDOW_START) {
+ spin_lock_bh(&ab_pci->window_lock);
+ ath11k_pci_select_window(ab_pci, offset);
+ val = ioread32(ab->mem + window_start +
+ (offset & WINDOW_RANGE_MASK));
+ spin_unlock_bh(&ab_pci->window_lock);
+ } else {
+ val = ioread32(ab->mem + window_start +
+ (offset & WINDOW_RANGE_MASK));
+ }
}
if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
@@ -936,6 +987,9 @@ static int ath11k_pci_power_up(struct ath11k_base *ab)
return ret;
}
+ if (ab->bus_params.static_window_map)
+ ath11k_pci_select_static_window(ab_pci);
+
return 0;
}
--
2.7.4
More information about the ath11k
mailing list