[PATCH 04/11] ath11k: Update memory segment count for qcn9074

[Anilkumar Kolli]

QCN9074 FW requests three types memory segments during the boot,
	qmi mem seg type 1 of size 15728640
	qmi mem seg type 4 of size 3735552
	qmi mem seg type 3 of size 1048576
Segment type 3 is for M3 coredump memory.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli at codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 2 +-
 drivers/net/wireless/ath/ath11k/qmi.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 0db623ff4bb9..104eabd8df02 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1760,7 +1760,7 @@ static int ath11k_qmi_alloc_target_mem_chunk(struct ath11k_base *ab)
 						  &chunk->paddr,
 						  GFP_KERNEL);
 		if (!chunk->vaddr) {
-			if (ab->qmi.mem_seg_count <= 2) {
+			if (ab->qmi.mem_seg_count <= ATH11K_QMI_FW_MEM_REQ_SEGMENT_CNT) {
 				ath11k_dbg(ab, ATH11K_DBG_QMI,
 					   "qmi dma allocation failed (%d B type %u), will try later with small size\n",
 					    chunk->size,
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 1797c3b59f48..a7d01c295e77 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -26,6 +26,7 @@
 #define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	52
 #define ATH11K_QMI_CALDB_SIZE			0x480000
 #define ATH11K_QMI_BDF_EXT_STR_LENGTH		0x20
+#define ATH11K_QMI_FW_MEM_REQ_SEGMENT_CNT	3
 
 #define QMI_WLFW_REQUEST_MEM_IND_V01		0x0035
 #define QMI_WLFW_FW_MEM_READY_IND_V01		0x0037
@@ -141,6 +142,7 @@ struct ath11k_qmi {
 #define QMI_IPQ8074_FW_MEM_MODE				0xFF
 #define HOST_DDR_REGION_TYPE				0x1
 #define BDF_MEM_REGION_TYPE				0x2
+#define M3_DUMP_REGION_TYPE				0x3
 #define CALDB_MEM_REGION_TYPE				0x4
 
 struct qmi_wlanfw_host_cap_req_msg_v01 {
-- 
2.7.4