ath11k with QCA6391

[Kalle Valo]

Devin Bayer <dev at doubly.so> writes:

> On 03/11/2020 14.56, Kalle Valo wrote:
>> Devin Bayer <dev at doubly.so> writes:
>> 
>>> On 02/11/2020 19.51, Kalle Valo wrote:
>>>>
>>>> To my knowledge, from ath11k point of view, QCA6391 should look the same
>>>> as QCA6390 but most likely the board file for QCA6391 is different.
>>>>
>>> [snip]
>>>
>>> They are different than those from your repo, but maybe I can use
>>> bdwlan01.e04 as the board file.
>> 
>> Yes, that's what I would also suggest to test first: take the firmware
>> from ath11k-firmware.git and the board file from the vendor.
>
> I would like to report that with your latest qca6390-bringup branch my QCA6391
> card is working well with just the one MSI vector. I'm using the board file for
> 6390 from the linux-firmware repo.
>
> Thanks for the fixes :)

Great, thanks for the report. It's always helpful to know what is
working or not working on the field.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches