[PATCH v2] ath11k: Fix the rx_filter flag setting for peer rssi stats

[Maharaja Kennadyrajan]

Set the rx_filter in ath11k_mac_config_mon_status_default(),
only when the rx_filter value exists in ath11k_debug_rx_filter().

Without this change, rx_filter gets set to 0 and peer rssi stats
aren't updating properly from firmware.

Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01230-QCAHKSWPL_SILICONZ-4

Fixes: ec48d28ba291 ("ath11k: Fix rx_filter flags setting for per peer rx_stats")

Signed-off-by: Maharaja Kennadyrajan <mkenna at codeaurora.org>
---

    V2: Added the "Fixes" tag in the commit message.

 drivers/net/wireless/ath/ath11k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 591dceb..cad4402 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4144,7 +4144,8 @@ static int ath11k_mac_config_mon_status_default(struct ath11k *ar, bool enable)
 
 	if (enable) {
 		tlv_filter = ath11k_mac_mon_status_filter_default;
-		tlv_filter.rx_filter = ath11k_debugfs_rx_filter(ar);
+		if (ath11k_debugfs_rx_filter(ar))
+			tlv_filter.rx_filter = ath11k_debugfs_rx_filter(ar);
 	}
 
 	for (i = 0; i < ab->hw_params.num_rxmda_per_pdev; i++) {
-- 
2.7.4