[PATCH] ath11k: fix rmmod failure if qmi sequence fails

[Kalle Valo]

Anilkumar Kolli <akolli at codeaurora.org> wrote:

> QMI sequence fails if caldata file is not available.
> It is observed that 'rmmod ath11k' fails if qmi message fails.
> With this patch rmmod/insmod is working.
> 
> Logs:
> Direct firmware load for IPQ8074/caldata.bin failed with error -2
> Falling back to user helper
> qmi failed to load CAL: IPQ8074/caldata.bin
> qmi failed to load board data file:-11
> 
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Anilkumar Kolli <akolli at codeaurora.org>

Does not apply, please rebase.

error: patch failed: drivers/net/wireless/ath/ath11k/qmi.c:2621
error: drivers/net/wireless/ath/ath11k/qmi.c: patch does not apply
stg import: Diff does not apply cleanly

Patch set to Changes Requested.

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/1602929817-25920-1-git-send-email-akolli@codeaurora.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches