[PATCH] ath11k: Fix beamformee STS in HE cap

[Ramya Gnanasekar]

STS Beamformee capability sent from firmware is overwritten as
num_tx_chains - 1.
When num_tx_chains is 2, then STS is set to invalid value 1.
Since STS is not limited by number of TX chain, not overwriting the
capability received from firmware.

Tested on: IPQ6018 WLAN.HK.2.4.0.1-00303-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ramya Gnanasekar <rgnanase at codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 7f8dd47..787b052 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3729,11 +3729,6 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
 
 		he_cap_elem->mac_cap_info[1] &=
 			IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK;
-		he_cap_elem->phy_cap_info[4] &=
-			~IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK;
-		he_cap_elem->phy_cap_info[4] &=
-			~IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK;
-		he_cap_elem->phy_cap_info[4] |= (ar->num_tx_chains - 1) << 2;
 
 		he_cap_elem->phy_cap_info[5] &=
 			~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
-- 
2.7.4