PROBLEM: unable to get QCA6390 to work

Carl Huang cjhuang at codeaurora.org
Tue Nov 3 03:42:01 EST 2020


On 2020-11-03 05:14, Pavel Procopiuc wrote:
> After doing some testing I was able to get it running under some
> specific conditions. I took the v5.9 tag of the main kernel tree and
> merged in the ath11k-qca6390-bringup-202009250825 tag from the ath
> tree. I had to fix some trivial conflicts, but the resulting kernel
> together with the firmware (amss.bin, m3.bin and board-2.bin) gave me
> a working driver that I was able to use to connect to my AP in both
> 2,4 and 5GHz.
> 
> I then tried to copy over the ath11k driver source resulting from that
> merge on top of the 5.10-rc2 tag. After fixing some API breakage
> (IEEE80211_TX_CTRL_HW_80211_ENCAP and ieee80211_set_hw_80211_encap) to
> make it compile I booted into the resulting kernel, but ath11k driver
> was giving me the same firmware errors I had initially on 5.10-rc2. So
> it looks like there might be some change in 5.10 that broke the logic.
> 
> Op 02.11.2020 om 19:21 schreef Pavel Procopiuc:
>> Ah, my bad, I've now renamed the board-2.bin file, the md5's match 
>> yours. But it doesn't seem to have a positive effect.

Please set ath11k.ko module parameter debug_mask to 0xffffffff, and then 
reproduce and share the log.



More information about the ath11k mailing list