[PATCH 01/11] ath11k: add support for m3 firmware

[Kalle Valo]

Kalle Valo <kvalo at codeaurora.org> wrote:

> PCI devices like QCA6390 have a separate firmware image for the m3
> micro-controller. Add support to load the firmware using m3.bin file.
> 
> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
> 
> Signed-off-by: Govind Singh <govinds at codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo at codeaurora.org>

11 patches applied to ath-next branch of ath.git, thanks.

569704544778 ath11k: add support for m3 firmware
6eb6ea513828 ath11k: add board file support for PCI devices
eb8de0490e1f ath11k: fill appropriate QMI service instance id for QCA6390
654e959ae0a1 ath11k: pci: add read32() and write32() hif operations
c4eacabee224 ath11k: configure copy engine msi address in CE srng
2c3960c2253d ath11k: setup ce tasklet for control path
26f3a021b37c ath11k: allocate smaller chunks of memory for firmware
f44dd33e6336 ath11k: fix memory OOB access in qmi_decode
6c809d04c542 ath11k: fix KASAN warning of ath11k_qmi_wlanfw_wlan_cfg_send
727fae1478a5 ath11k: enable internal sleep clock
f7eb4b04ce6f ath11k: hal: create hw_srng_config dynamically

-- 
https://patchwork.kernel.org/patch/11713607/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches