[PATCH v2 1/8] dt-bindings: mmc: Document support for nvmem-layout

[Loic Poulain]

Add support for an nvmem-layout subnode under an eMMC hardware
partition. This allows the partition to be exposed as an NVMEM
provider and its internal layout to be described. For example,
an eMMC boot partition can be used to store device-specific
information such as a WiFi MAC address.

Signed-off-by: Loic Poulain <loic.poulain at oss.qualcomm.com>
---
 .../devicetree/bindings/mmc/mmc-card.yaml          | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.yaml b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
index a61d6c96df759102f9c1fbfd548b026a77921cae..b21426a49cf1d9aae5b4e8e447b5be11b08c96bf 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-card.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
@@ -40,6 +40,9 @@ patternProperties:
         contains:
           const: fixed-partitions
 
+      nvmem-layout:
+        $ref: /schemas/nvmem/layouts/nvmem-layout.yaml
+
 required:
   - compatible
   - reg
@@ -86,6 +89,27 @@ examples:
                     read-only;
                 };
             };
+
+            partitions-boot2 {
+                nvmem-layout {
+                    compatible = "fixed-layout";
+
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    mac-addr at 4400 {
+                        compatible = "mac-base";
+                        reg = <0x4400 0x6>;
+                        #nvmem-cell-cells = <1>;
+                    };
+
+                    bd-addr at 5400 {
+                        compatible = "mac-base";
+                        reg = <0x5400 0x6>;
+                        #nvmem-cell-cells = <1>;
+                    };
+                };
+            };
         };
     };
 

-- 
2.34.1