ath10k_pci 0000:3a:00.0: Could not init core: -110

[Kalle Valo]

Baochen Qiang <quic_bqiang at quicinc.com> writes:

> On 5/27/2024 4:42 PM, Paul Menzel wrote:
>> Dear Linux folks,
>> 
>> 
>> On the Intel Kaby Lake notebook Dell XPS 13 with
>> 
>>     3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174
>> 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
>> 
>> with at least a self-built Linux 6.9-rc5, on April 26th, 2024, and
>> Linux 6.8.11, today, May 27th, 2024, the error below happened, and
>> the device couldn’t authenticate to a WiFi network until reloading
>> the module *ath10k_core* and *ath10k_pci* (didn’t check just
>> *ath10k_pci*):
>> 
>>     $ sudo modprobe -r ath10k_pci
>>     $ sudo modprobe -r ath10k_core
>>     $ sudo modprobe ath10k_pci
>> 
>> ```
>> [   49.441618] ath10k_pci 0000:3a:00.0: wmi service ready event not received
>> [   49.523814] ath10k_pci 0000:3a:00.0: Could not init core: -110

[...]

> Are you using a distro kernel? Could you check if below patch merged
> in your kernel? if not can you merge it and try again?
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k?id=e57b7d62a1b2f496caf0beba81cec3c90fad80d5

Paul, if you are feeling brave to try out an -rc this commit is in just
released v6.10-rc1.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches