pull-request: ath-next-20240605
Kalle Valo
kvalo at kernel.org
Wed Jun 5 11:30:46 PDT 2024
Kalle Valo <kvalo at kernel.org> wrote:
> Hi,
>
> Please pull, more information in the tag below.
>
> Kalle
>
> The following changes since commit f1c26960b6afb9c38a4019ad36392c654db6e20e:
>
> Merge tag 'ath-next-20240502' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath (2024-05-03 13:30:19 +0300)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git tags/ath-next-20240605
>
> for you to fetch changes up to 22767241e64427bbcffea2e2d51531ab467bc4ef:
>
> wifi: ath12k: add hw_link_id in ath12k_pdev (2024-06-03 16:15:50 +0300)
>
> ----------------------------------------------------------------
> ath.git patches for v6.11
>
> ath12k
>
> * remove unsupported tx monitor handling
>
> * channel 2 in 6 GHz band support
>
> * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
>
> * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
>
> * dynamic VLAN support
>
> * add panic handler for resetting the firmware state
>
> ath10k
>
> * add qcom,no-msa-ready-indicator Device Tree property
>
> * LED support for various chipsets
>
> ----------------------------------------------------------------
> Aloka Dixit (9):
> wifi: ath12k: advertise driver capabilities for MBSSID and EMA
> wifi: ath12k: configure MBSSID params in vdev create/start
> wifi: ath12k: rename MBSSID fields in wmi_vdev_up_cmd
> wifi: ath12k: create a structure for WMI vdev up parameters
> wifi: ath12k: configure MBSSID parameters in AP mode
> wifi: ath12k: refactor arvif security parameter configuration
> wifi: ath12k: add MBSSID beacon support
> wifi: ath12k: add EMA beacon support
> wifi: ath12k: skip sending vdev down for channel switch
>
> Baochen Qiang (9):
> wifi: ath12k: fix Smatch warnings on ath12k_core_suspend()
> wifi: ath11k: refactor setting country code logic
> wifi: ath11k: restore country code during resume
> wifi: ath11k: fix wrong definition of CE ring's base address
> wifi: ath12k: fix race due to setting ATH12K_FLAG_EXT_IRQ_ENABLED too early
> wifi: ath12k: fix wrong definition of CE ring's base address
> wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
> wifi: ath12k: do not process consecutive RDDM event
> wifi: ath12k: add panic handler
>
> Breno Leitao (2):
> wifi: wil6210: Do not use embedded netdev in wil6210_priv
> wifi: ath12k: allocate dummy net_device dynamically
>
> Jeff Johnson (8):
> wifi: ath11k: refactor CE remap & unmap
> wifi: ath11k: unmap the CE in ath11k_ahb_probe() error path
> wifi: ath12k: initialize 'ret' in ath12k_qmi_load_file_target_mem()
> wifi: ath11k: initialize 'ret' in ath11k_qmi_load_file_target_mem()
> wifi: ath11k: fix misspelling of "dma" in num_rxmda_per_pdev
> wifi: ath12k: fix misspelling of "dma" in num_rxmda_per_pdev
> wifi: ath12k: initialize 'ret' in ath12k_dp_rxdma_ring_sel_config_wcn7850()
> wifi: ath12k: Fix devmem address prefix when logging
>
> Kalle Valo (1):
> wifi: ath11k: ath11k_mac_op_ipv6_changed(): use list_for_each_entry()
>
> Kang Yang (5):
> wifi: ath12k: remove unused variable monitor_flags
> wifi: ath12k: avoid duplicated vdev stop
> wifi: ath12k: avoid duplicated vdev down
> wifi: ath12k: remove invalid peer create logic
> wifi: ath12k: remove redundant peer delete for WCN7850
>
> Karthikeyan Kathirvel (1):
> wifi: ath12k: drop failed transmitted frames from metric calculation.
>
> Karthikeyan Periyasamy (13):
> wifi: ath12k: Refactor the hardware recovery procedure
> wifi: ath12k: Refactor the hardware state
> wifi: ath12k: Add lock to protect the hardware state
> wifi: ath12k: Replace "chip" with "device" in hal Rx return buffer manager
> wifi: ath12k: Refactor idle ring descriptor setup
> wifi: ath12k: Introduce device index
> wifi: ath12k: add multi device support for WBM idle ring buffer setup
> wifi: ath12k: avoid double SW2HW_MACID conversion
> wifi: ath12k: remove duplicate definition of MAX_RADIOS
> wifi: ath12k: use correct MAX_RADIOS
> wifi: ath12k: refactor rx descriptor CMEM configuration
> wifi: ath12k: improve the rx descriptor error information
> wifi: ath12k: add hw_link_id in ath12k_pdev
>
> Lingbo Kong (1):
> wifi: ath12k: fix ack signal strength calculation
>
> Marc Gonzalez (2):
> dt-bindings: net: wireless: ath10k: add qcom,no-msa-ready-indicator prop
> wifi: ath10k: do not always wait for MSA_READY indicator
>
> Muna Sinada (1):
> wifi: ath12k: dynamic VLAN support
>
> Nithyanantham Paramasivam (1):
> wifi: ath12k: Fix tx completion ring (WBM2SW) setup failure
>
> P Praneesh (3):
> wifi: ath12k: change DMA direction while mapping reinjected packets
> wifi: ath12k: fix invalid memory access while processing fragmented packets
> wifi: ath12k: fix firmware crash during reo reinject
>
> Pradeep Kumar Chitrapu (6):
> wifi: ath12k: add channel 2 into 6 GHz channel list
> wifi: ath12k: Correct 6 GHz frequency value in rx status
> wifi: ath12k: fix survey dump collection in 6 GHz
> wifi: ath12k: add 6 GHz params in peer assoc command
> wifi: ath12k: refactor SMPS configuration
> wifi: ath12k: support SMPS configuration for 6 GHz
>
> Rob Herring (Arm) (1):
> dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
>
> Sebastian Gottschall (1):
> wifi: ath10k: add LED and GPIO controlling support for various chipsets
>
> Sven Eckelmann (1):
> wifi: ath12k: Don't drop tx_status in failure case
>
> Tamizh Chelvam Raja (3):
> wifi: ath12k: fix calling correct function for rx monitor mode
> wifi: ath12k: Remove unsupported tx monitor handling
> wifi: ath12k: Remove unused tcl_*_ring configuration
>
> Venkateswara Naralasetty (1):
> wifi: ath11k: skip status ring entry processing
>
> .../bindings/net/wireless/qcom,ath10k.yaml | 5 +
> .../bindings/net/wireless/qcom,ath11k.yaml | 9 -
> drivers/net/wireless/ath/ath10k/Kconfig | 6 +
> drivers/net/wireless/ath/ath10k/Makefile | 1 +
> drivers/net/wireless/ath/ath10k/core.c | 32 ++
> drivers/net/wireless/ath/ath10k/core.h | 8 +
> drivers/net/wireless/ath/ath10k/hw.h | 1 +
> drivers/net/wireless/ath/ath10k/leds.c | 90 ++++
> drivers/net/wireless/ath/ath10k/leds.h | 34 ++
> drivers/net/wireless/ath/ath10k/mac.c | 1 +
> drivers/net/wireless/ath/ath10k/qmi.c | 11 +
> drivers/net/wireless/ath/ath10k/qmi.h | 1 +
> drivers/net/wireless/ath/ath10k/wmi-ops.h | 32 ++
> drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 +
> drivers/net/wireless/ath/ath10k/wmi.c | 54 ++
> drivers/net/wireless/ath/ath10k/wmi.h | 35 ++
> drivers/net/wireless/ath/ath11k/ahb.c | 57 +-
> drivers/net/wireless/ath/ath11k/ce.h | 6 +-
> drivers/net/wireless/ath/ath11k/core.c | 49 +-
> drivers/net/wireless/ath/ath11k/debugfs.c | 6 +-
> drivers/net/wireless/ath/ath11k/dp.c | 12 +-
> drivers/net/wireless/ath/ath11k/dp_rx.c | 104 +++-
> drivers/net/wireless/ath/ath11k/dp_tx.c | 6 +-
> drivers/net/wireless/ath/ath11k/hal.c | 16 +-
> drivers/net/wireless/ath/ath11k/hal.h | 2 +
> drivers/net/wireless/ath/ath11k/hw.h | 4 +-
> drivers/net/wireless/ath/ath11k/mac.c | 19 +-
> drivers/net/wireless/ath/ath11k/qmi.c | 2 +-
> drivers/net/wireless/ath/ath11k/reg.c | 18 +-
> drivers/net/wireless/ath/ath11k/reg.h | 4 +-
> drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
> drivers/net/wireless/ath/ath12k/ce.h | 6 +-
> drivers/net/wireless/ath/ath12k/core.c | 144 ++++--
> drivers/net/wireless/ath/ath12k/core.h | 44 +-
> drivers/net/wireless/ath/ath12k/dp.c | 83 +--
> drivers/net/wireless/ath/ath12k/dp.h | 4 +-
> drivers/net/wireless/ath/ath12k/dp_mon.c | 40 +-
> drivers/net/wireless/ath/ath12k/dp_rx.c | 115 ++---
> drivers/net/wireless/ath/ath12k/dp_tx.c | 165 +++---
> drivers/net/wireless/ath/ath12k/dp_tx.h | 5 +-
> drivers/net/wireless/ath/ath12k/hal.c | 5 +-
> drivers/net/wireless/ath/ath12k/hal.h | 21 +-
> drivers/net/wireless/ath/ath12k/hal_desc.h | 47 +-
> drivers/net/wireless/ath/ath12k/hal_tx.h | 4 +-
> drivers/net/wireless/ath/ath12k/hif.h | 9 +
> drivers/net/wireless/ath/ath12k/hw.c | 23 +-
> drivers/net/wireless/ath/ath12k/hw.h | 4 +-
> drivers/net/wireless/ath/ath12k/mac.c | 574 ++++++++++++++++-----
> drivers/net/wireless/ath/ath12k/mhi.c | 11 +
> drivers/net/wireless/ath/ath12k/pci.c | 39 +-
> drivers/net/wireless/ath/ath12k/pci.h | 1 +
> drivers/net/wireless/ath/ath12k/qmi.c | 8 +-
> drivers/net/wireless/ath/ath12k/reg.c | 19 +-
> drivers/net/wireless/ath/ath12k/wmi.c | 55 +-
> drivers/net/wireless/ath/ath12k/wmi.h | 48 +-
> drivers/net/wireless/ath/wil6210/netdev.c | 21 +-
> drivers/net/wireless/ath/wil6210/wil6210.h | 2 +-
> 57 files changed, 1516 insertions(+), 610 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath10k/leds.c
> create mode 100644 drivers/net/wireless/ath/ath10k/leds.h
Pulled, thanks.
a46300b1b09b Merge tag 'ath-next-20240605' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
--
https://patchwork.kernel.org/project/linux-wireless/patch/87a5jzs6w2.fsf@kernel.org/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
More information about the ath10k
mailing list