[PATCH 1/2] wifi: ath10k: fix invalid VHT parameters in supported_vht_mcs_rate_nss1

[Baochen Qiang]

In supported_vht_mcs_rate_nss1, the rate for MCS9 & VHT20 is defined as
{780,  867}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():

	invalid vht params rate 960 100kbps nss 1 mcs 9

Change it to {865,  960} to align with firmware, so this issue could be
fixed.

Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1

Fixes: 3344b99d69ab ("ath10k: add bitrate parse for peer stats info")
Reported-by: Paul Menzel <pmenzel at molgen.mpg.de>
Closes: https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-8402272788ff@molgen.mpg.de/
Signed-off-by: Baochen Qiang <quic_bqiang at quicinc.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a5da32e87106..3c34f3d8e555 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -9121,7 +9121,7 @@ static const struct ath10k_index_vht_data_rate_type supported_vht_mcs_rate_nss1[
 	{6,  {2633, 2925}, {1215, 1350}, {585,  650} },
 	{7,  {2925, 3250}, {1350, 1500}, {650,  722} },
 	{8,  {3510, 3900}, {1620, 1800}, {780,  867} },
-	{9,  {3900, 4333}, {1800, 2000}, {780,  867} }
+	{9,  {3900, 4333}, {1800, 2000}, {865,  960} }
 };
 
 /*MCS parameters with Nss = 2 */
-- 
2.25.1