ath10k-firmware: WCN3990: Add board file for the Qualcomm Robotics RB1 platform

Dmitry Baryshkov dmitry.baryshkov at
Thu Aug 24 14:50:03 PDT 2023

Hello Kalle,

We'd like to ask for inclusion of the board file for the Qualcomm
Robotics RB1 platform. It is
an IOT platform manufactured by Thundercomm, using the Snapdragon QRB2210 SoC.

Following the questions from the ath10k wiki page:

* description for what hardware this is
- It is an QRB2210-based platform (QRB2210)
- It uses wcn3990 chip as a WiFi and BT radio
- For the reference:

ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007
board_id 0xff soc_id 0x40670000
ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp
2023-01-06 01:50 fw_build_id
ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
0x00000000 sub 0000:0000
ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc c800000.wifi: firmware ver  api 5 features
wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file
max-sta 32 raw 0 hwcrypto 1

* origin of the board file
  - It comes from the firmware package provided by Thundercomm for

* ids to be used with the board file


Note, the device comes with the board_id not changed from 0xff.
Following the example of existing boards we are adding the
calibration variant.

* md5sum of each new board file to add

$ md5sum *

$ sha256sum *

With best wishes
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1.bin
Type: application/octet-stream
Size: 26328 bytes
Desc: not available
URL: <>

More information about the ath10k mailing list