[PATCH 1/2] ath10k: add support for MSDU IDs for USB devices

[Erik Stromdahl]

On 3/28/22 07:28, Kalle Valo wrote:
> Erik Stromdahl <erik.stromdahl at gmail.com> writes:
> 
>> commit 93bbdec6683e1c8ba2cc4e6 ("ath10k: htt: support MSDU ids with
>> SDIO") introduced MSDU ID allocation in the htt TX path for high latency
>> devices. This feature needs to be enabled for USB as well in order to
>> have a functional TX path.
>>
>> Signed-off-by: Erik Stromdahl <erik.stromdahl at gmail.com>
> 
> On what hardware and firmware version did you test these patches? I'll
> then add the Tested-on tag:
> 
> https://wireless.wiki.kernel.org/en/users/drivers/ath10k/submittingpatches#tested-on_tag
> 

Hardware: Linksys WUSB6100M
Fw version: QCA9377 hw1.0 USB 1.0.0.299

Above fw version is printed by the driver at startup:

ath10k_log_dbg: usb 1-3 firmware 1.0.0.299 booted

The firmware file can be obtained from here:
https://www.linksys.com/se/support-article?articleNum=198580