ath10k-firmware: QCA4019 hw1.0: Add Linksys WHW01 v1 specific BDFs

[Kalle Valo]

"Peter Adkins" <peter at sunkenlab.com> writes:

> In order to properly add support to OpenWrt for the Linksys WHW01 v1 (FCC ID Q87-0333) [1], BDFs were required to be extracted from the vendor's firmware (version 1.1.13.202617 [2]). Without these the radios did not appear to operate correctly; the 5GHz radio was unable to scan, and when running in AP mode, clients were unable to connect.
>
> The vendor firmware appears to provide a number of board files which are installed at device power-on depending on the configured region - AU, FCC, EU, etc. Only the FCC board files have been included here, as I'm unsure whether all files should be submitted and whether there are any differences (although their md5s did not match)?
>
> Information requested, per the wiki page [3]:
>
> * description for what hardware this is:
>
>   - it is a IPQ4018 based board
>     - one qca4019 radio is used as 2.4GHz radio
>     - one qca4019 radio is used as 5GHz radio
>
> * origin of the board file (did you create it yourself or where you downloaded)
>
>   - Extracted from Linksys WHW01 v1 firmware (1.1.13.202617) [2]
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
>   - bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-whw01-v1
>     md5: 92f5a223a963211d884b6211385dfa91
>   - bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-whw01-v1
>     md5: 5bb0357df9cf3614fe4d9db696d09e43

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-whw01-v1
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-whw01-v1

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 86 in total

https://github.com/kvalo/ath10k-firmware/commit/fb4e69fcead641ed592207b133e67f0a4c6d9dab

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches