[v2] ath10k-firmware: QCA9888 hw1.0: Add Linksys MR8300 V1.0 specific BDFs

Christian Lamparter chunkeey at gmail.com
Sat Feb 19 16:06:48 PST 2022


On 21/01/2022 15:09, Kalle Valo wrote:
> Hans Geiblinger <cybrnook2002 at yahoo.com> writes:
>> The support for this device is currently being added into OpenWrt. This AP requires
>> two special BDFs to get the Wi-Fi PHYs working (correctly).
>> * description for what hardware this is:
>>     - it is a QCA9888 based radio used for 5Ghz
>> * origin of the board file
>>     - boarddata files were taken from OEM Linksys FW_MR8300_1.1.7.201281_prod.img
>> * ids to be used with the board file
>>     - QCA9888 hw1.0
>>       + bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-mr8300-v0-fcc
>>       MD5: 1f263c52e7862bccab6fd6551092077c
>> * attach the actual board file
>>     - The name of the files are equal to the id string in the
>> board-2.bin (minus the ".bin")
> Thanks, added to QCA9984/hw1.0/board-2.bin:

Oh... I just noticed. I think this got misplaced into
QCA9984's board-2.bin. But this was for the QCA9888(v2). :(

Well, at least there shouldn't be any conflicts.
Should I resend the Linksys MR8300's board files and
add that as a note for your next round?

(BTW: hope linux-firmware.git syncs them up anyway.)


More information about the ath10k mailing list