EAP AP/VLAN: multicast not send to client

Ben Greear greearb at candelatech.com
Sun Feb 7 12:42:42 EST 2021

On 2/7/21 9:13 AM, Sven Eckelmann wrote:
> On Sunday, 7 February 2021 17:50:11 CET Ben Greear wrote:
>> Here are the images:
>> http://www.candelatech.com/downloads/ath10k-4019-10-4b/bisect/
> Thanks, will try to have look at them tomorrow evening. Can you confirm which
> QCA ath10k version was used as the base for this one? I've read somewhere on
> your page - which doesn't seem to be in Kalles' repository. And my
> original plan was to test the relevant QCA firmware first and check if the
> problem might already be in the base version which you've used for your
> builds. But maybe I will just start with the oldest one in you tree and check
> if the problem is also there and based on the result decide how to continue.

I don't know exactly how qca versioning works, but my notes are that the initial
upstream wave-2 code was 3.5.3-00050, from back in 2018.

The first commit in the series should be very similar to stock FW, though perhaps
missing some feature flags.  Maybe try forcing the driver to try to allow
vlans...if it is missing feature flag only, that might work around it.

Somewhere along the way I fixed up raw transmit in my firmware, so possibly
only then will vlans really have a chance of working.


Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

More information about the ath10k mailing list