ath10k-firmware: QCA4019 hw1.0: Add OpenMesh A42 specific BDFs

[Kalle Valo]

Sven Eckelmann <sven.eckelmann at openmesh.com> writes:

> Hi,
>
> I am currently trying to integrate the OpenMesh A42 support in LEDE [1]. This 
> AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The 
> bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because
> QCA doesn't provide special IDs for customers and seems to use the AP-DK
> board-ids in the wifi firmware to change its behavior. But we've already
> proposed a patch to work around this kind of problem [2].
>
> The name of the files are equal to the id string in the board-2.bin (minus the 
> ".bin"):
>
> * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=OM-A42
>   - sha256sum: 
>     10700a7ac636d57fe055e5bb4bd5f7bb3f1c282a7f25a8bb2204fc36e8c317bf
> * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=OM-A42
>   - sha256sum:
>     b3d9556894e509ac608b2e27c9169da12c63634670bb69c5ef21fb31583e7998

I added these now:

https://github.com/kvalo/ath10k-firmware/commit/5cd2bacd8e22217335e539b416d0cb8d59f8e312

To make this easier I did some bigger changes in ath10k-bdencoder,
please check carefully that I didn't break anything.

-- 
Kalle Valo