ath10k-firmware: QCA4019 hw1.0/QCA9888 hw2.0: Add OpenMesh A62 specific BDFs

[Kalle Valo]

Christian Lamparter <chunkeey at gmail.com> writes:

> On Donnerstag, 19. April 2018 16:47:22 CEST Sven Eckelmann wrote:
>> On Donnerstag, 19. April 2018 14:33:04 CEST Kalle Valo wrote:
>> > >> Unfortunately, this is wrong. Please check the mail again. The 
>> > >> bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 
>> > >> hw2.0 board-2.bin and not the QCA4019 hw1.0.
>> > >
>> > > Thanks for noticing, I'll fix that. But please separate different hw to
>> > > different mails, this way I can process them one hw version at the time.
>> > 
>> > Fixed now, please double check:
>> > 
>> > https://github.com/kvalo/ath10k-firmware/commit/a315471a5f4c9890e2ed1bdb008b7aae5c885ae0
>> > 
>> > https://github.com/kvalo/ath10k-firmware/commit/c3604f7d3ff61d1905aac644c721372f3c2a9663
>> 
>> 
>> Ok, will use md5sum and split my submission based on the wifi hw.
>> 
>> The board-2.bin's look fine now.
>> 
>> pending
>> =======
>> 
>> * Asus RT-AC58U
>> 
>>   - submitted before the guide was published
>>   - http://lists.infradead.org/pipermail/ath10k/2017-March/009454.html
> I made a v2 back in 2018 January.
>
> http://lists.infradead.org/pipermail/ath10k/2018-January/010770.html
>
> This was necessary since ASUS updated the board file.

Oh, I missed that. I already pushed the update with 2017 board files,
but I'll try to update them in the next few days.

-- 
Kalle Valo