ath10k-firmware: QCA4019 hw1.0/QCA9888 hw2.0: Add OpenMesh A62 specific BDFs

[Kalle Valo]

Sven Eckelmann <sven.eckelmann at openmesh.com> writes:

> On Donnerstag, 19. April 2018 10:20:41 CEST Kalle Valo wrote:
> [...]
>> >   - QCA4019 hw1.0
>> >
>> >     + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
>> >       sha256sum:
>> >       df5dc5a55506e2a58dcb0b8542f40226d3bfd530a6fc0bc90c728ab18a57144c
>> >     + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
>> >       sha256sum:
>> >       96c3d044fe26522c75313c210ace6f85d5bdcdbce3350214d92467501a01fb88
>> >
>> >   - QCA9888 hw2.0
>> >
>> >     + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
>> >       sha256sum:
>> >       c85b23763e748abeb7e8c42e243dab1fc58d1bff94111e4058bdf31ddb14cefa
> [...]
>> I added these now, please check the results:
>> 
>> https://github.com/kvalo/ath10k-firmware/commit/
> a262aac7cfe5ae5833378b4f1b0634f873a4df4d
>> 
>
> Unfortunately, this is wrong. Please check the mail again. The 
> bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62 BDF is for the QCA9888 
> hw2.0 board-2.bin and not the QCA4019 hw1.0.

Thanks for noticing, I'll fix that. But please separate different hw to
different mails, this way I can process them one hw version at the time.

-- 
Kalle Valo