[PATCH] ath10k: fix tlv 5ghz channel missing issue

[zhichen at codeaurora.org]

From: Zhi Chen <zhichen at codeaurora.org>

The 5ghz channel parameters of TLV target wasn't passed to host, it caused
host can only use lower channels from 36 to 64.

Signed-off-by: Zhi Chen <zhichen at codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 25efbb5..b8985ce 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1010,6 +1010,8 @@ static int ath10k_wmi_tlv_op_pull_svc_rdy_ev(struct ath10k *ar,
 	arg->phy_capab = ev->phy_capability;
 	arg->num_rf_chains = ev->num_rf_chains;
 	arg->eeprom_rd = reg->eeprom_rd;
+	arg->low_5ghz_chan = reg->low_5ghz_chan;
+	arg->high_5ghz_chan = reg->high_5ghz_chan;
 	arg->num_mem_reqs = ev->num_mem_reqs;
 	arg->service_map = svc_bmap;
 	arg->service_map_len = ath10k_wmi_tlv_len(svc_bmap);
-- 
2.1.4