ath10k: Fix reported HT MCS rates with NSS > 1

[akolli at codeaurora.org]

On 2017-11-20 17:40, Kalle Valo wrote:
> Peter Oh <peter.oh at bowerswilkins.com> writes:
> 
>> On 11/06/2017 01:02 AM, Sven Eckelmann wrote:
>>> On Montag, 6. November 2017 09:28:42 CET Sebastian Gottschall wrote:
>>>> Am 06.11.2017 um 09:23 schrieb Sven Eckelmann:
>>>>> On Sonntag, 5. November 2017 10:22:22 CET Sebastian Gottschall 
>>>>> wrote:
>>>>>> the assumption made in this patch is obviously wrong (at least for 
>>>>>> more
>>>>>> recent firmwares and 9984)
>>>>>> my log is flooded with messages like
>>>>>> [208802.803537] ath10k_pci 0001:03:00.0: Invalid VHT mcs 15 peer 
>>>>>> stats
>>>>>> [208805.108515] ath10k_pci 0001:03:00.0: Invalid VHT mcs 15 peer 
>>>>>> stats
>>>>>> [208821.747621] ath10k_pci 0001:03:00.0: Invalid VHT mcs 15 peer 
>>>>>> stats
>>>>>> [208822.516599] ath10k_pci 0001:03:00.0: Invalid VHT mcs 15 peer 
>>>>>> stats
>>>>>> [208841.257780] ath10k_pci 0001:03:00.0: Invalid VHT mcs 15 peer 
>>>>>> stats
>>> [...]
>>>>> This patch only splits WMI_RATE_PREAMBLE_HT & 
>>>>> WMI_RATE_PREAMBLE_VHT. And for
>>>>> WMI_RATE_PREAMBLE_HT (*not VHT*), it uses a slightly different 
>>>>> approach. But
>>>>> the WMI_RATE_PREAMBLE_VHT part (which you see in your logs) is 
>>>>> basically
>>>>> untouched.
>>>> then a question follows up. is this check really neccessary?
>>> Until we find out what the heck VHT MCS 15 should mean in this 
>>> context - maybe.
>>> But to the message - no, the message is most likely not necessary for 
>>> each
>>> received "invalid" peer tx stat.
>> 
>> This validation check expects peer tx stat packets from FW contain
>> reasonable values and gives warning if values are different from
>> expectation. The problem comes from the assumption that "it always
>> contains reasonable stat value" which is wrong at least based on my
>> results. For instance, the reason MCS == 15 is because all 4 bits of
>> mcs potion set to 1, not because FW really sets it to 15
>> intentionally. when the mcs potion bits are set to all 1s, the other
>> bits such as nss are also set to all 1s.
>> Hence it looks FW passed totally invalid stat info to me.
>> 
>> I don't have preference on whether it's better to split VHT and HT
>> check or not, but it is more appropriate to change that warning level
>> to debug level.
> 
> I think we should add a special case to not print the warning if mcs ==
> 15 until we figure out what it means.

Fix identified in Firmware and will push ASAP.

--
Anil.