firmware crash; Atheros QCA6174 doesn't work

[Kalle Valo]

Ryan Hsu <ryanhsu at qti.qualcomm.com> writes:

>> ### 3. dmesg user made firmware ####
>> 
>> 
>> [ 1772.091031] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
>> irq_mode 0 reset_mode 0 [ 1772.369412] ath10k_pci 0000:01:00.0: qca6174
>> hw3.2 target 0x05030000 chip_id 0x00340aff sub 144d:c150 [ 1772.369417]
>> ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
>> [ 1772.370701] ath10k_pci 0000:01:00.0: firmware ver
>> qca61x4_2_2_samsung_api_5 api 5 features  crc32 93d04d09 [ 1772.452929]
>> ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-
>> id=0,bmi-board-id=0 from ath10k/QCA6174/hw3.0/board-2.bin [ 1772.452942]
>
> Are you using the same driver you rebuild on #2? This all 0 seems to
> be like the same issue that has been fixed.
> Can you help to check the ath10k git you're using have this fix as well?
> https://patchwork.kernel.org/patch/9486941/

That patch should be in v4.11-rc1 and all releases after that.

d2e202c06ca4 ath10k: ignore configuring the incorrect board_id

-- 
Kalle Valo