Introducing issue when updating firmware to 10.2.4.70.63-2

[Gilbert Moisio]

Thanks and sorry for the confusion

Le 17 août 2017 09:18, "Kalle Valo" <kvalo at qca.qualcomm.com> a écrit :

Gilbert Moisio <gmoisio at gmail.com> writes:

> Hi, moving ath10k_pci firmware to ver 10.2.4.70.63-2 in the
> linux-firmware package is crashing with the following dmesg output:
>
> -----------------------------------------------------------------------------------------------------------
> [ 3.794990] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
> irq_mode 0 reset_mode 0
> [ 3.956604] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c
> chip_id 0x043222ff sub 0000:0000
> [ 3.956616] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing
> 0 dfs 0 testmode 0
> [ 3.957508] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.70.63-2 api 5
> features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
> [ 3.999024] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
> [ 5.141993] ath10k_pci 0000:01:00.0: firmware crashed! (uuid
> 5e1bf845-c278-425c-8c6d-c335a7833655)
> [ 5.151307] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c
> chip_id 0x043222ff sub 0000:0000
> [ 5.151315] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing
> 0 dfs 0 testmode 0
> [ 5.152235] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.70.63-2 api 5
> features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
> [ 5.152254] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
> [ 5.152265] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal
> otp max-sta 128 raw 0 hwcrypto 1
> [ 5.154307] ath10k_pci 0000:01:00.0: firmware register dump:
> [ 5.160007] ath10k_pci 0000:01:00.0: [00]: 0x4100016C 0x000015B3
> 0x009BFF84 0x00955B31
> [ 5.167961] ath10k_pci 0000:01:00.0: [04]: 0x009BFF84 0x00060130
> 0x00000013 0x00000000
> [ 5.175943] ath10k_pci 0000:01:00.0: [08]: 0x009C8EA4 0x00007170
> 0x00000001 0x00435300

Thanks, I see multiple reports of this in the ath10k list. This is now
reported to the firmware team.

--
Kalle Valo