Compex WLE600VX firmware crash

Mon Aug 7 13:06:13 PDT 2017

Hi Adrian,

Sorry, I'm not sure I understand the reason for the sarcasm.

In my original bug report post that I made in July I was totally ignored.

In that post I note that with firmware-5.bin_10.2.4.70.59-2 boot is ok
and router works but upgrading to latest released
firmware-5.bin_10.2.4.70.63-2 causes crash at boot.

What I noticed from Sergey's post was that the firmware register dumps
were identical between his crash at startup and my crash at startup on
different hardware platforms and thought this might prove useful to
somebody with more knowledge.

If there is some useful test that I could perform to help the
community further then please just ask.

Kindest regards,
Richard

On 7 August 2017 at 21:52, Adrian Chadd <adrian at freebsd.org> wrote:
> Hi,
>
> If you can point to some older version working and newer version not..
> oh wait, hm, let me see if they changed the calibration data format
> between those two firmware revisions. Sigh.
>
>
>
> -adrian
>
>
> On 7 August 2017 at 12:47, Richard Toy <richard.toy at gmail.com> wrote:
>> As I already said to Sergey, that dump looks identical to the one I
>> posted last month for exactly the same version of firmware running on
>> a TP AC1750.  I never found a solution but the previous version (54?)
>> works fine.
>>
>> http://lists.infradead.org/pipermail/ath10k/2017-July/009933.html
>>
>> Richard
>>
>> On 7 August 2017 at 14:26, svp <s.pooheer at gmail.com> wrote:
>>>
>>> On 05.08.2017 03:07, Adrian Chadd wrote:
>>>>
>>>> Hi,
>>>>
>>>> Is this being used as a STA? AP? What's it associating to? what
>>>> channel, mode, etc
>>>>
>>>>
>>>>
>>>> -adrian
>>>>
>>>
>>> Hi!
>>> The device was not initialized. Driver failed to set up network interface.
>>> If then I try to start driver as modprobe ath10k_pci  - result is the same -
>>> firware crash.
>>> More accurate dmesg log here:
>>>
>>> [    2.651496] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
>>> [    2.651731] ath10k_pci 0000:06:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
>>> [    2.677241] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>>> [    2.688848] random: crng init done
>>> [    2.694209] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
>>> [    2.694237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
>>> [    2.694259] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
>>> [    2.694280] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
>>> [    2.719901] fbcon: inteldrmfb (fb0) is primary device
>>> [    2.763642] Console: switching to colour frame buffer device 240x75
>>> [    2.785165] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>>> [    2.808817] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
>>> [    2.808818] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
>>> [    2.808960] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
>>> [    2.849225] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
>>> [    3.102190] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
>>> [    3.120930] nct6775: Enabling hardware monitor logical device mappings.
>>> [    3.120944] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
>>> [    3.403675] enp3s0: 0xffffa31883295000, 74:d0:2b:7e:f7:35, IRQ 30
>>> [    3.979192] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 1773073a-6896-4834-91d4-6d0e9b026b06)
>>> [    3.979241] ath10k_pci 0000:06:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
>>> [    3.979244] ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
>>> [    3.979456] ath10k_pci 0000:06:00.0: firmware ver 10.2.4.70.63-2 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 4ff9e14d
>>> [    3.979461] ath10k_pci 0000:06:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
>>> [    3.979463] ath10k_pci 0000:06:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
>>> [    3.981477] ath10k_pci 0000:06:00.0: firmware register dump:
>>> [    3.981501] ath10k_pci 0000:06:00.0: [00]: 0x4100016C 0x000015B3 0x009BFF84 0x00955B31
>>> [    3.981530] ath10k_pci 0000:06:00.0: [04]: 0x009BFF84 0x00060130 0x00000013 0x00000000
>>> [    3.981559] ath10k_pci 0000:06:00.0: [08]: 0x009C8EA4 0x00007170 0x00000001 0x00435300
>>> [    3.981588] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x00958360 0x0095836B
>>> [    3.981616] ath10k_pci 0000:06:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
>>> [    3.981645] ath10k_pci 0000:06:00.0: [20]: 0x409BFF84 0x0040AB44 0x004101E0 0x0000000C
>>> [    3.981675] ath10k_pci 0000:06:00.0: [24]: 0x809BFE1C 0x0040ABA4 0x00000006 0xC09BFF84
>>> [    3.981703] ath10k_pci 0000:06:00.0: [28]: 0x8098E907 0x0040ABD4 0x009C8E7C 0x0000016B
>>> [    3.982735] ath10k_pci 0000:06:00.0: [32]: 0x8098FD3B 0x0040ABF4 0x004209EC 0x00420B0C
>>> [    3.983755] ath10k_pci 0000:06:00.0: [36]: 0x8098A7DA 0x0040AC34 0x00420AA0 0x004062DC
>>> [    3.984763] ath10k_pci 0000:06:00.0: [40]: 0x80988785 0x0040AC94 0x00410760 0x00400000
>>> [    3.985763] ath10k_pci 0000:06:00.0: [44]: 0x8098AEC8 0x0040AD44 0x00410760 0x00000001
>>> [    3.986752] ath10k_pci 0000:06:00.0: [48]: 0x809B67C4 0x0040AD84 0x00410760 0x00411344
>>> [    3.987740] ath10k_pci 0000:06:00.0: [52]: 0x809B293C 0x0040ADA4 0x00400000 0x00416FA4
>>> [    3.988723] ath10k_pci 0000:06:00.0: [56]: 0x809C0C3D 0x0040ADE4 0x0040AE08 0x00412118
>>> [    3.989700] ath10k_pci 0000:06:00.0: Copy Engine register dump:
>>> [    3.990684] ath10k_pci 0000:06:00.0: [00]: 0x00057400   0   0 3   3
>>> [    3.991670] ath10k_pci 0000:06:00.0: [01]: 0x00057800   3   3 8   9
>>> [    3.992652] ath10k_pci 0000:06:00.0: [02]: 0x00057c00   1   1 0   1
>>> [    3.993628] ath10k_pci 0000:06:00.0: [03]: 0x00058000   1   1 2   1
>>> [    3.994587] ath10k_pci 0000:06:00.0: [04]: 0x00058400   0   0 40   0
>>> [    3.995529] ath10k_pci 0000:06:00.0: [05]: 0x00058800   0   0 0   0
>>> [    3.996454] ath10k_pci 0000:06:00.0: [06]: 0x00058c00   0   0 0   0
>>> [    3.997359] ath10k_pci 0000:06:00.0: [07]: 0x00059000   0   0 0   0
>>> [    5.501878] r8168: enp3s0: link up
>>> [    7.630654] usb 3-13: device descriptor read/64, error -110
>>> [    9.010685] ath10k_pci 0000:06:00.0: wmi unified ready event not received
>>> [    9.082483] ath10k_pci 0000:06:00.0: could not init core (-110)
>>> [    9.083167] ath10k_pci 0000:06:00.0: could not probe fw (-110)
>>> [    9.097304] ath10k_pci 0000:06:00.0: cannot restart a device that hasn't been started
>>>
>>>
>>> Sergey
>>>
>>>
>>> _______________________________________________
>>> ath10k mailing list
>>> ath10k at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/ath10k