odd msg using kvalo firmware-5.bin w/ KillerAC 1535(QCA6174)

[Mohammed Shafi Shajakhan (Mohammed Shafi)]

Hi,

my quick analysis suggests this belongs to
'WMI_TLV_GRP_STATS' 

WMI_TLV_STATS_EXT_EVENTID = WMI_TLV_EV(WMI_TLV_GRP_STATS), equals to 90112 (0x16000)
        WMI_TLV_IFACE_LINK_STATS_EVENTID, 90113
        WMI_TLV_PEER_LINK_STATS_EVENTID, 90114
        WMI_TLV_RADIO_LINK_STATS_EVENTID, 90015
             .... ?
        WMI_TLV_NLO_MATCH_EVENTID = WMI_TLV_EV(WMI_TLV_GRP_NLO_OFL),

but this should be a harmless warning message indicating the host had not implemented
any action for this particular event.

For example in 10.2 wmi.c


   case WMI_10_2_GPIO_INPUT_EVENTID:
        case WMI_10_2_PEER_RATECODE_LIST_EVENTID:
        case WMI_10_2_GENERIC_BUFFER_EVENTID:
        case WMI_10_2_MCAST_BUF_RELEASE_EVENTID:
        case WMI_10_2_MCAST_LIST_AGEOUT_EVENTID:
        case WMI_10_2_WDS_PEER_EVENTID:
                ath10k_dbg(ar, ATH10K_DBG_WMI,
                           "received event id %d not implemented\n", id);
                break;


________________________________________
From: ath10k <ath10k-bounces at lists.infradead.org> on behalf of Michael Scott <michael.scott at linaro.org>
Sent: 20 April 2017 00:07
To: ath10k at lists.infradead.org
Cc: Kalle Valo
Subject: odd msg using kvalo firmware-5.bin w/ KillerAC 1535(QCA6174)

I am currently testing a QCA6174-based M.2/NGFF card (KillerAC 1535) w/
linux-next kernel.  When I use the firmware-5.bin from Kalle Valo's
github: https://github.com/kvalo/ath10k-firmware, I see the following
message occasionally in dmesg:
ath10k_pci 0000:01:00.0: Unknown eventid: 90118

If I revert back to firmware-4.bin, that message goes away.

(Spoke with kvalo on IRC and passing this info along to the list)

- Mike

_______________________________________________
ath10k mailing list
ath10k at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k