[2/4] ath10k: implement offset_tsf ieee80211_op

[Kalle Valo]

"Pedersen, Thomas" <twp at qca.qualcomm.com> wrote:
> Current set_tsf is implemented in terms of TSF_INCREMENT
> only. Instead support new WMI command TSF_DECREMENT and
> export these through offset_tsf. Advantage is we get
> more accurate TSF adjustments, and don't calculate wrong
> offset in case absolute TSF was calculated from rx_mactime
> (actual TSF).
> 
> The new WMI command is available in firmware
> 10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new
> firmware or vice versa shouldn't  be a problem since
> get/set tsf logic was already broken.
> 
> Signed-off-by: Thomas Pedersen <twp at qca.qualcomm.com>

2 patches applied to ath-next branch of ath.git, thanks.

973324fff154 ath10k: implement offset_tsf ieee80211_op
f6f64cfb966d ath10k: remove set/get_tsf ieee80211_ops

-- 
https://patchwork.kernel.org/patch/9355377/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches