[PATCH 2/2] ath10k: Fix sending NULL/ Qos NULL data frames for QCA99X0 and later

[Mohammed Shafi Shajakhan]

Hello Michal/ Kalle,

On Tue, Jun 28, 2016 at 08:48:38AM +0200, Michal Kazior wrote:
> On 27 June 2016 at 16:36, Mohammed Shafi Shajakhan
> <mohammed at codeaurora.org> wrote:
> > Hi Michal,
> >
> > thanks for the review ..
> >
> > On Mon, Jun 27, 2016 at 11:27:27AM +0200, Michal Kazior wrote:
> >> On 23 June 2016 at 18:40, Mohammed Shafi Shajakhan
> >> <mohammed at qti.qualcomm.com> wrote:
> >> > From: Mohammed Shafi Shajakhan <mohammed at qti.qualcomm.com>
> >> >
> >> > For chipsets like QCA99X0, IPQ4019 and later we are not getting proper
> >> > NULL func status (always acked/successs !!) when hostapd does a
> >> > PROBE_CLIENT via nullfunc frames when the station is powered off
> >> > abruptly (inactive timer probes client via null func after the inactive
> >> > time reaches beyond the threshold). Fix this by disabling the workaround
> >> > (getting the ACK status of NULL func frames by sending via HTT mgmt-tx
> >> >  path) introduced by the change ("ath10k: fix beacon loss handling ")
> >> > for QCA99X0 and later chipsets. The normal tx path provides the proper
> >> > ACK status for NULL data frames. As of now disable this workaround for
> >> > chipsets QCA99X0 and later, once the 10.1 firmware is obselete we can
> >> > completely get rid of this workaround for all the chipsets
> >> >
> >> > Signed-off-by: Tamizh chelvam <c_traja at qti.qualcomm.com>
> >> > Signed-off-by: Mohammed Shafi Shajakhan <mohammed at qti.qualcomm.com>
> >> > ---
> >> >  drivers/net/wireless/ath/ath10k/core.c | 3 +++
> >> >  drivers/net/wireless/ath/ath10k/core.h | 6 ++++++
> >> >  drivers/net/wireless/ath/ath10k/mac.c  | 1 +
> >> >  3 files changed, 10 insertions(+)
> >> >
> >> > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
> >> > index 689d6ce..9978e4a 100644
> >> > --- a/drivers/net/wireless/ath/ath10k/core.c
> >> > +++ b/drivers/net/wireless/ath/ath10k/core.c
> >> > @@ -181,6 +181,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> >> >                         .board = QCA99X0_HW_2_0_BOARD_DATA_FILE,
> >> >                         .board_size = QCA99X0_BOARD_DATA_SZ,
> >> >                         .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
> >> > +                       .disable_null_func_workaround = true,
> >>
> >> Tx completion (bugs) are firmware specific, not hardware. This should
> >> be expressed via features bits in ath10k FW API, no?
> >>
> >>
> > [shafi] Are you suggesting me to introduce something like
> > "ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT" ? Kalle any suggestions ?
> >
> > Also how about getting this workaround completely if Ben had fixed this in his tree,
> > will this affect older 10.2.4 ?
> 
> There's still 636.
> 
> We could probably get rid of this as long as:
>  - ath10k can express the need to use Probe Requests for AP probing
> (in client mode) and beacon loss handling purposes instead of NullFunc
> to mac80211
>  - everyone uses hostapd with disassoc_low_ack=1 with affected
> firmware revisions
>  - supplicant uses disassoc_low_ack=1 for p2p go
>  - I have no idea about mesh/ibss but they might require some work as well
> 
> Otherwise you'll introduce regressions.
>

[shafi] sure then we will disable this for 10.4 (QCA99X0 and later)

*firmware feature requires a new firmware updated this feature, so the bug
will be present for all the older firmware, please correct me if my
understanding is wrong

*We discussed wmi_op_version is not the way to go (in the sense just disable it
for 10.4 alone)

Let me know if there is any other suggestion (the existing change though bit
cleanly is very explicit regarding the chipsets that this workaround is not
needed), thank you !

regards,
shafi