Cannot initialize Compex WLE600VX for 802.11ac?

[Tomasz Skapski]

In your config file set 'fragm_threshold=-1', or comment it.
Regards,
Tomasz Skąpski


On 23 June 2016 at 15:00, Tom Marble <tmarble at info9.net> wrote:
> "Valo, Kalle" <kvalo at qca.qualcomm.com> writes:
>> Tom Marble <tmarble at info9.net> writes:
>>> "Valo, Kalle" <kvalo at qca.qualcomm.com> writes:
>>>> Do you have CONFIG_ATH10K_DFS_CERTIFIED enabled?
>>>
>>> No.. the option isn't even commented out in my .config??
>>
>> It depends on CFG80211_CERTIFICATION_ONUS so you need to enable that
>> first.
>
> Okay, I've rebuild the kernel with that option. Here's the latest info:
>
> root at six:/# uname -a
> Linux six 4.7.0-rc3-wt-ath-tm2 #4 SMP Wed Jun 22 11:47:12 CDT 2016 x86_64 GNU/Linux
> root at six:/# iw reg get
> country US: DFS-FCC
>         (2402 - 2472 @ 40), (N/A, 30), (N/A)
>         (5170 - 5250 @ 80), (N/A, 17), (N/A)
>         (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS
>         (5735 - 5835 @ 80), (N/A, 30), (N/A)
>         (57240 - 63720 @ 2160), (N/A, 40), (N/A)
> root at six:/# iw phy0 info
>   SEE http://paste.debian.net/747986/
>
> Setting channel=0 to enable scanning results still fails
> # hostapd -dd /etc/hostapd/wlan0.conf | tee /tmp/wlan0.log
>   SEE http://paste.debian.net/747988/
>
>   nl80211: Failed to set fragmentation threshold 2346: -95 (Operation not supported)
>   Could not set fragmentation threshold for kernel driver
>   Interface initialization failed
>
> Seems to have made it a little further... What should I try now?
>
> --Tom
>
>
> _______________________________________________
> ath10k mailing list
> ath10k at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k