Not able to capture qos data packets - QCA988x

[Michal Kazior]

On 26 July 2016 at 05:06, sudheer thota <sdhrtht at outlook.com> wrote:
> wireless interface(ath10k) monitor failing to capture data packets when
> WMM enabled on AP.
>
> AP Status reflects in following state: (when no QOS data Packets. MGMT and CTRL Packets are able to captured)
> 1) 0x03 (3) - Secondary channel is below Primary
> 2) 1 - any Channel width in secondary channel width
> 3) 1 - Use of RIFS permitted
> 4) 0x02 - Only HT STAs in the BSS, however there exists at least on 20Mhz STA
> 5) 0 - all Associated HT STAs are greenfield capable

You didn't really explain your topology. Are you using ath10k to sniff
only or to run AP *and* sniff at the same time?

FWIW It's kind of a problem to sniff your own transmission with QoS
because of NWifi vs 802.11 headers problem so regular packet
dissection won't recognize them properly.


Michał