request: ACK timing setting required

[Sebastian Gottschall]

Am 25.05.2015 um 19:53 schrieb Ben Greear:
>
>
> On 05/25/2015 10:48 AM, Sebastian Gottschall wrote:
>> Am 25.05.2015 um 19:13 schrieb Ben Greear:
>>>
>>>
>>> On 05/25/2015 10:10 AM, Sebastian Gottschall wrote:
>>>> Hello
>>>>
>>>> could it be possible to add a ACK timing feature to the ath10k 
>>>> firmware (QCA9880 internal register 0x8014, mask 0x3FFF)
>>>
>>> You just need ability to set this register to some value?
>>>
>>> If so, probably something I could add to CT firmware, at least.
>>>
>> not alone. this register is rewritten on each reset (channel change 
>> etc.) so it needs to be correct handled.
>> yes. just writing and handling the ack value would be enough. the 
>> math behind is no problem.
>> otherwise its impossible todo long range links with ath10k. (LSDK 
>> based firmware from compex do support this feature unlike ath10k)
>
> I'll see if I can add this to my firmware, probably will be a few days 
> before I can get
> time to work on it.  Will post to list when I have a FW build ready 
> for testing.
do you plan to bring up your codebase to 10.2.4 with api 5 one time?
or is the code already up to date, just using the old api?
>
> Thanks,
> Ben
>