[PATCH 2/2] ath10k: increase station kickout threshold

[Ben Greear]

On 03/03/2015 04:20 AM, Rajkumar Manoharan wrote:
> Since the station kickout threshold is also counting software
> reries (Default sw count in firmware is 16), increasing the threshold
> to try with already 20 data frames before kicking out the station.
>
> Signed-off-by: Rajkumar Manoharan <rmanohar at qti.qualcomm.com>
> ---
>   drivers/net/wireless/ath/ath10k/core.h | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
> index 7cba781..5a0b7cb 100644
> --- a/drivers/net/wireless/ath/ath10k/core.h
> +++ b/drivers/net/wireless/ath/ath10k/core.h
> @@ -50,8 +50,8 @@
>
>   #define ATH10K_MAX_NUM_MGMT_PENDING 128
>
> -/* number of failed packets */
> -#define ATH10K_KICKOUT_THRESHOLD 50
> +/* number of failed packets (includes sw reties) */
> +#define ATH10K_KICKOUT_THRESHOLD (20 * 16)

Maybe add comment about '20 packets with 16 retries each', so that users know what
number is what?

Thanks,
Ben

>
>   /*
>    * Use insanely high numbers to make sure that the firmware implementation
>


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com