[PATCH] ath10k: enable qca6174 hw3.2

[Michal Kazior]

The 3.2 revision has a different target BMI
version so it wasn't recognized by ath10k (despite
the chip_id rev being on the supported list
already).

Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 14 ++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 2 files changed, 15 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5e9e1a6..36a8fcf 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -85,6 +85,20 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA6174_HW_3_2_VERSION,
+		.name = "qca6174 hw3.2",
+		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
+		.uart_pin = 6,
+		.fw = {
+			.dir = QCA6174_HW_3_0_FW_DIR,
+			.fw = QCA6174_HW_3_0_FW_FILE,
+			.otp = QCA6174_HW_3_0_OTP_FILE,
+			.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
+			.board_size = QCA6174_BOARD_DATA_SZ,
+			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
+		},
+	},
 };
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5771278..460771f 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -40,6 +40,7 @@
 #define QCA6174_HW_1_3_VERSION		0x05000003
 #define QCA6174_HW_2_1_VERSION		0x05010000
 #define QCA6174_HW_3_0_VERSION		0x05020000
+#define QCA6174_HW_3_2_VERSION		0x05030000
 
 enum qca6174_pci_rev {
 	QCA6174_PCI_REV_1_1 = 0x11,
-- 
1.8.5.3