[RFC/RFT] ath10k: enable IBSS in multi-vif

[Michal Kazior]

On 20 January 2015 at 10:14, Yeoh Chun-Yeow <yeohchunyeow at gmail.com> wrote:
> Experienced firmware crashed in 636 firmware immediately after
> bringing up the AP interface.
>
> The partial log is listed here:
[...]
> [  291.380000] ath10k_pci 0000:00:00.0: firmware register dump:
> [  291.380000] ath10k_pci 0000:00:00.0: [00]: 0x4100016C 0x00000000
> 0x009C4521 0x00000000
> [  291.390000] ath10k_pci 0000:00:00.0: [04]: 0x009C4521 0x00060330
> 0x00000019 0x00955A00
> [  291.400000] ath10k_pci 0000:00:00.0: [08]: 0x00046A4E 0x00000000
> 0x0040CC94 0x00000020
> [  291.410000] ath10k_pci 0000:00:00.0: [12]: 0x00000000 0x00000000
> 0x00958360 0x0095836B
> [  291.420000] ath10k_pci 0000:00:00.0: [16]: 0x809A0978 0x0040AD94
> 0x00439304 0x0040D074
> [  291.420000] ath10k_pci 0000:00:00.0: [20]: 0x0000FFFF 0x00000000
> 0x0041B618 0x00000000
> [  291.430000] ath10k_pci 0000:00:00.0: [24]: 0x809A0978 0x0040AD94
> 0x00439304 0x11A93B77
> [  291.440000] ath10k_pci 0000:00:00.0: [28]: 0x809AD1A2 0x0040ADE4
> 0x00439304 0x0043F68C
> [  291.450000] ath10k_pci 0000:00:00.0: [32]: 0x00000001 0x00000000
> 0x00000000 0x00430D74
> [  291.460000] ath10k_pci 0000:00:00.0: [36]: 0x00000000 0x00000000
> 0x00000000 0x00000000
> [  291.460000] ath10k_pci 0000:00:00.0: [40]: 0x00000000 0x00000000
> 0x000000AB 0x00412700
> [  291.470000] ath10k_pci 0000:00:00.0: [44]: 0x00439BB8 0x00000000
> 0x00000000 0x00400000
> [  291.480000] ath10k_pci 0000:00:00.0: [48]: 0x809AE0B4 0x0040AE04
> 0x00400000 0x0043F68C
> [  291.490000] ath10k_pci 0000:00:00.0: [52]: 0x00000001 0x00000000
> 0x004231F0 0x00400000
> [  291.500000] ath10k_pci 0000:00:00.0: [56]: 0x809AE17E 0x0040AE44
> 0x0040FE6C 0x0040D310

Yeah.. This is monitor vdev related crash (due to bridging, no?). I
haven't found a way around it.


Michał