[PATCH 2/2] ath10k: fix quiet duration configuration

[Rajkumar Manoharan]

Duty cycle is nothing but percentage of one period in which a
signal is active. But it is wrongly interpreted as ratio of quiet
duration. So fix the quiet duration to the remaining percentage
of duty cycle (active ratio).

Signed-off-by: Rajkumar Manoharan <rmanohar at qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c
index aede750..0d89ab5 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.c
+++ b/drivers/net/wireless/ath/ath10k/thermal.c
@@ -98,7 +98,7 @@ static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
 	}
 	period = max(ATH10K_QUIET_PERIOD_MIN,
 		     (ATH10K_QUIET_PERIOD_DEFAULT / num_bss));
-	duration = (period * duty_cycle) / 100;
+	duration = (period * (100 - duty_cycle)) / 100;
 	enabled = duration ? 1 : 0;
 
 	ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
-- 
2.3.0