[PATCH] ath10k: advertise all possible firmware(-api) files

[Bartosz Markowski]

This is required if we take into account possibility to load the driver
from initrd (RAM disk), so in other words: very early in the boot process,
before the file system is visible.

In such case we need to have the firmware files accessible from ram disk too,
and this patch guarantee this.

Signed-off-by: Bartosz Markowski <bartosz.markowski at tieto.com>
---
 drivers/net/wireless/ath/ath10k/hw.h  | 1 -
 drivers/net/wireless/ath/ath10k/pci.c | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 006a9cb..6dca960 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -28,7 +28,6 @@
 #define QCA988X_HW_2_0_CHIP_ID_REV	0x2
 #define QCA988X_HW_2_0_FW_DIR		"ath10k/QCA988X/hw2.0"
 #define QCA988X_HW_2_0_FW_FILE		"firmware.bin"
-#define QCA988X_HW_2_0_FW_3_FILE	"firmware-3.bin"
 #define QCA988X_HW_2_0_OTP_FILE		"otp.bin"
 #define QCA988X_HW_2_0_BOARD_DATA_FILE	"board.bin"
 #define QCA988X_HW_2_0_PATCH_LOAD_ADDR	0x1234
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 8a04904..730bb18 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2600,5 +2600,7 @@ module_exit(ath10k_pci_exit);
 MODULE_AUTHOR("Qualcomm Atheros");
 MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_3_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API2_FILE);
+MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API3_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
-- 
1.8.2