Unicast packets stop being transmitted to a particular station, under load, when WPA2 is enabled

[Avery Pennarun]

On Sun, May 11, 2014 at 11:09 PM, Ben Greear <greearb at candelatech.com> wrote:
> Can you reproduce with any other type of station
> device?

I'll try.  It's a little tricky since it seems to involve running
Chrome, etc, rather than my usual command-line tests for which I have
a wider variety of clients.

> Also, have you tried sniffing with a third device to see if
> the AP actually puts the ICMP responses on the air?

I did try that.  As far as I can tell, the ICMP responses are simply
not being sent at all.