[PATCH 2/5] ath10k: perform hw restart lazily
Michal Kazior
michal.kazior at tieto.com
Fri May 9 05:15:46 PDT 2014
This reduces risk of races and prepares for more
hw restart fixes.
It also makes sense to perform teardown after
mac80211 starts its restart routine as it
guarantees it has stopped itself by then
(including tx queues).
Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 5 ++++-
drivers/net/wireless/ath/ath10k/mac.c | 34 ++++++++++++++++------------------
2 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 75b3dfb..7034c72 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -681,7 +681,8 @@ static void ath10k_core_restart(struct work_struct *work)
switch (ar->state) {
case ATH10K_STATE_ON:
ar->state = ATH10K_STATE_RESTARTING;
- ath10k_halt(ar);
+ del_timer_sync(&ar->scan.timeout);
+ ath10k_reset_scan((unsigned long)ar);
ieee80211_restart_hw(ar->hw);
break;
case ATH10K_STATE_OFF:
@@ -690,6 +691,8 @@ static void ath10k_core_restart(struct work_struct *work)
ath10k_warn("cannot restart a device that hasn't been started\n");
break;
case ATH10K_STATE_RESTARTING:
+ /* hw restart might be requested from multiple places */
+ break;
case ATH10K_STATE_RESTARTED:
ar->state = ATH10K_STATE_WEDGED;
/* fall through */
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index eef9104..dbf0960 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2303,6 +2303,7 @@ void ath10k_halt(struct ath10k *ar)
}
del_timer_sync(&ar->scan.timeout);
+ ath10k_reset_scan((unsigned long)ar);
ath10k_offchan_tx_purge(ar);
ath10k_mgmt_over_wmi_tx_purge(ar);
ath10k_peer_cleanup_all(ar);
@@ -2310,12 +2311,6 @@ void ath10k_halt(struct ath10k *ar)
ath10k_hif_power_down(ar);
spin_lock_bh(&ar->data_lock);
- if (ar->scan.in_progress) {
- del_timer(&ar->scan.timeout);
- ar->scan.in_progress = false;
- ieee80211_scan_completed(ar->hw, true);
- }
-
list_for_each_entry(arvif, &ar->arvifs, list) {
if (!arvif->beacon)
continue;
@@ -2336,8 +2331,18 @@ static int ath10k_start(struct ieee80211_hw *hw)
mutex_lock(&ar->conf_mutex);
- if (ar->state != ATH10K_STATE_OFF &&
- ar->state != ATH10K_STATE_RESTARTING) {
+ switch (ar->state) {
+ case ATH10K_STATE_OFF:
+ ar->state = ATH10K_STATE_ON;
+ break;
+ case ATH10K_STATE_RESTARTING:
+ ath10k_halt(ar);
+ ar->state = ATH10K_STATE_RESTARTED;
+ break;
+ case ATH10K_STATE_ON:
+ case ATH10K_STATE_RESTARTED:
+ case ATH10K_STATE_WEDGED:
+ WARN_ON(1);
ret = -EINVAL;
goto out;
}
@@ -2354,11 +2359,6 @@ static int ath10k_start(struct ieee80211_hw *hw)
goto err_power_down;
}
- if (ar->state == ATH10K_STATE_OFF)
- ar->state = ATH10K_STATE_ON;
- else if (ar->state == ATH10K_STATE_RESTARTING)
- ar->state = ATH10K_STATE_RESTARTED;
-
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
if (ret) {
ath10k_warn("failed to enable PMF QOS: %d\n", ret);
@@ -2409,12 +2409,10 @@ static void ath10k_stop(struct ieee80211_hw *hw)
struct ath10k *ar = hw->priv;
mutex_lock(&ar->conf_mutex);
- if (ar->state == ATH10K_STATE_ON ||
- ar->state == ATH10K_STATE_RESTARTED ||
- ar->state == ATH10K_STATE_WEDGED)
+ if (ar->state != ATH10K_STATE_OFF) {
ath10k_halt(ar);
-
- ar->state = ATH10K_STATE_OFF;
+ ar->state = ATH10K_STATE_OFF;
+ }
mutex_unlock(&ar->conf_mutex);
ath10k_mgmt_over_wmi_tx_purge(ar);
--
1.8.5.3
More information about the ath10k
mailing list