compat-wireless-2014-05-22 breaks ath10k in an Archer C7 v2

[Matti Laakso]

> ------------------------------------------------------------------------
> Hi Kalle,
>
> Am 07.06.2014 07:36, schrieb Kalle Valo:
> >/ Kamal Koshy <kamal.koshy at gmail.com <http://lists.infradead.org/mailman/listinfo/ath10k>> writes:
> />/
> />>/ Attaching the result of dd if=/dev/mtd4 > ~/mtd4
> />/ Thanks, I'll take a look at that later. But before that, do you know
> />/ what's the mac address of the QCA9880 device with the proprietary
> />/ driver? (_not_ with ath10k) That would help searching for the
> />/ calibration data.
> />/
> /To me it looks like ath9k calibration data starts at 0x1000, and ath10k 
> calibration data
> starts at 0x5000 in that mtd image. That's the same as on my board.
>
> Sven
>

Yeah, that's definitely the case.

I think we need something like this for ath10k:

https://github.com/kvalo/ath/blob/master/include/linux/ath9k_platform.h

which we can then populate in the mach-file.

Matti