Fwd: Throughput is very low
Bart Jooris
Bart.Jooris at intec.ugent.be
Fri Jul 18 00:39:10 PDT 2014
Dear Mamun,
On 07/17/2014 01:34 PM, Mamun Abu-Tair wrote:
> which version of hostapd you are using ?
./hostap/hostapd/hostapd -v
hostapd v2.3-devel
User space daemon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
Copyright (c) 2002-2014, Jouni Malinen <j at w1.fi> and contributors
I followed these instructions:
http://wireless.kernel.org/en/users/Documentation/hostapd#Download_and_compile_hostapd
> mine show as follow
>
> [ 13.846597] ath10k: firmware 10.1.467.2-1 booted
> [ 13.856533] ath10k: htt target version 2.1
>
> Dose this make any difference ?!!!
Difference in output is probably related to your driver version?
I have:
modinfo ath10k_pci
filename: /lib/modules/3.11.0-24-generic/updates/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
firmware: ath10k/QCA988X/hw2.0/board.bin
firmware: ath10k/QCA988X/hw2.0/otp.bin
firmware: ath10k/QCA988X/hw2.0/firmware.bin
license: Dual BSD/GPL
description: Driver support for Atheros QCA988X PCIe devices
author: Qualcomm Atheros
version: backported from Linux (v3.15.1-0-g41b67d8) using backports v3.15.1-1-0-gfcc5f19
srcversion: 2F02C56BB696ECC1D986D19
alias: pci:v0000168Cd0000003Csv*sd*bc*sc*i*
depends: ath10k_core,compat
vermagic: 3.11.0-24-generic SMP mod_unload modversions
parm: ath10k_target_ps:Enable ath10k Target (SoC) PS option (uint)
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
and also
dmesg | grep backport
[ 3.595614] Loading modules backported from Linux version v3.15.1-0-g41b67d8
[ 3.595617] Backport generated by backports.git v3.15.1-1-0-gfcc5f19
see
http://wireless.kernel.org/en/users/Drivers/ath10k/backports#ath10k_backports_releases
Best regards,
Bart
--
Bart Jooris
Department of Information Technology
Internet Based Communication Networks and Services (IBCN)
Ghent University - iMinds
Gaston Crommenlaan 8 (Bus 201), B-9050 Gent, Belgium
More information about the ath10k
mailing list